Fig. 9.2
Fig. 9.1
D
B
PE
A
N
L
ELECTRICAL FEEDER CABLE
CONNECTION
To connect the supply cable:
- Remove the screws securing the
cover “A” on the rear of the cooker
(fig. 9.1).
- Feed the supply cable through the
cable clamp “D”. The supply cable
must be of a suitable size for the cur-
rent requirements of the appliance;
see the section “Feeder cable sec-
tion”.
- Connect the wires to the terminal
block “B” as shown in the diagram in
figure 9.2; or connect the phase wires
to the terminal block “B” and the
earth wire to the terminal PE as
shown in figure 9.1.
- Take up any slack in the cable and
secure with the cable clamp “D”.
- Replace the cover “A”.
