Bedienungsanleitung M-System MKK604 (Seite 15 von 20) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

680033

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

GENERAL

Carefully read the contents of this lea et since it provides

important instructions regarding safety of installation, use

and maintenance.

Keep the leaflet for possible future consultation. All the

operations relating to installation/replacement (electrical

connections) must be carried out by specialised personnel

in conformity with the regulations in force.

SAFETY WARNINGS

It is recommended to use  at-bottom pans with a diameter

equal to or slightly larger than that of the heated area. Do not

use pans with a rough base to prevent scratching the heat

surface of the cooktop (Fig.2).

This appliance is not suitable for use by children or persons

requiring supervision. Do not let children play with the ap-

pliance.

Important

- Avoid spilling liquid, therefore to boil or heat liquids, reduce

the heat.

- Do not leave the heating elements on with empty pots and

pans or without receptacles.

- When you have  nished cooking, switch o the relevant

heating element with the control indicated below.

Attention:

- Steam cleaners must not be used.

- If the surface is cracked, switch o the appliance to

prevent electric shock.

- This appliance is not intended for use by young children

or in rm persons without supervision

- Young children should be supervised to ensure they do

not play with the appliance

This appliance conforms to the European Directive EC/2002/96,

Waste Electrical and Electronic Equipment (WEEE). By making

sure that this appliance is disposed of in a suitable manner, the

user is helping to prevent potential damage to the environ-

ment or to public health.

The

symbol on the product or on the accompanying pa-

perwork indicates that the appliance should not be treated as

domestic waste, but should be delivered to a suitable electric

and electronic appliance recycling collection point. Follow lo-

cal guidelines when disposing of waste. For more information

on the treatment, re-use and recycling of this product, please

contact your local authority, domestic waste collection service

or the shop where the appliance was purchased.

INSTALLATION INSTRUCTIONS

These instructions address specialised installers and serve

as a guide for installation, adjustment and maintenance in

conformity with the laws and regulations in force. If a built-in

oven or any other appliance that generates heat must be  tted

directly under the glass-ceramic cooktop, THIS APPLIANCE

(oven) AND THE GLASS-CERAMIC COOKTOP MUST BE SUIT-

ABLY INSULATED in such a way that the heat generated by the

oven, measured on the bottom right of the cooktop, does not

exceed 60°C. Failure to respect this precaution may determine

improper functioning of the TOUCHCONTROL system.

Positioning (Fig.1)

The domestic appliance is designed to be built into a worktop

as illustrated in the speci c  gure. Apply sealant around the

entire perimeter (cut-out dimensions Fig.1B). Fix the domes-

tic appliance on the worktop by means of the 4 brackets

provided, taking the thickness of the worktop into account

(Fig.1A). If the lower part of the appliance, after installation, is

accessible via the lower part of the cabinet then it is necessary

to mount a separator panel respecting the distances indicated

(Fig.1C). If the appliance is installed with an oven underneath

then the separator is not necessary.

Electrical connections

Before making the electrical connections, check that:

- the ground cable is 2 cm longer than the other cables;

- the system ratings meet the ratings indicated on the identi-

 cation plate  xed on the lower part of the worktop;

- the system is  tted with e cient earthing compliant to the

laws and regulations in force.

Earthing is obligatory by law.

If the appliance is not  tted with a cable, use type:

"H05V2V2-F" for a power level of up to 6400 Watts. The cross-

section of the cable should be at least 2.5 mm, or 4 mm for

greater power levels.

The cable should never reach a temperature which is 50°C

above the temperature of the room in which it is installed.

The appliance is designed for permanent connection to the

electricity supply and should therefore be fitted with an

omnipolar switch which has a minimum opening of 3 mm

between contacts. The switch should be suitable for the char-

ge indicated on the appliance data plate and must conform to

all current legislation (the yellow/green earth wire must not

be interrupted by the switch).

The omnipolar switch must be easy to reach once the instal-

lation process has been completed.

Attention: On the basis of the model in possession the elec-

tronic board may be protected by eventual errors caused in the

electrical network connection by a fuse on the board.

If replacement is necessary, use a fuse that has exactly the

same technical speci cations.

USE AND MAINTENANCE

Maintenance

Remove any residues of food and drops of grease from

the cooking surface using the special scraper supplied on

request (Fig.3)

Clean the heated area as thoroughly as possible using

SIDOL, STAHLFIX or similar products and a cloth/paper, then

rinse with water and dry with a clean cloth.

Using the special scraper (optional) immediately remove any

fragments of aluminium and plastic material that have unin-

tentionally melted on the heated cooking area or residues of

sugar or food with a high sugar content (Fig.3). In this way,

any damage to the cooktop surface is prevented.

Under no circumstances use abrasive sponges or irritating

chemical detergents such as oven sprays or stain removers.

ENGLISH

- 15 -

M-System MKK604 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info