Bedienungsanleitung M-System MVW-600 (Seite 40 von 52) (Deutsch, Englisch)

522705

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

• They produce good results for certain types

of usage only. If you are using this type of

detergents, you need to contact the manu-

facturers and ﬁnd out about the suitable con-

ditions of use.

• When the conditions of use of such products

and the machine settings are appropriate,

they ensure savings in salt and/or rinse aid

consumption.

• Contact the detergent manufacturers if you

are not obtaining good wash results (if your

dishes stay calcareous and wet) after having

used 2 in 1 or 3 in 1 detergents. The scope

of warranty for your machine does not cover

any complaints caused by the use of these

types of detergents.

Recommended usage: If you want to obtain bet-

ter results while using combined detergents,

add salt and rinse aid into your machine and ad-

just the water hardness setting and the rinse

aid setting to the lowest position.

Solubility of the tablet detergents

produced by different companies can

vary depending on the temperature

and time. Therefore, it is not recommended

to use such detergents in short programs. It

is more suitable to use powder detergents in

such programs.

Warning: Should any problem, which you have

not encountered before, arise with the use of

this type of detergents, contact the detergent

manufacturers directly.

When you give up using combined detergents

• Fill the salt and rinse aid compartments.

• Adjust the water hardness setting to the hi-

ghest position and run an empty-wash.

• Adjust the water hardness level.

• Make the suitable rinse aid setting.

Filling with rinse aid and making the setting

Rinse aid is used to prevent the stay of white

water drops, lime stains, white ﬁlm stripsha-

ped stains that may form on the dishes, as well

as to increase the drying performance. Contra-

ry to the popular beliefs, it is used not only for

obtaining shinier dishes but also for obtaining

sufﬁciently dried dishes. For this reason, care

should be taken that there is adequate amount

of rinse aid in the rinse aid compartment and

only polishing material produced for use at dis-

hwashers should be used.

To put rinse aid, re-

move the rinse aid

compartment cap by

turning it. 1 Fill the

rinse aid compart-

ment with rinse aid

until the rinse aid le-

vel indicator becomes dark; 2 reﬁt the cap and

close it by turning

it in a way that the

nails will correspond

to one another. By

checking the rinse

aid level indicator

on the detergent

dispenser, you can understand whether or not

your machine needs rinse aid. A dark indicator

b means that there is rinse aid in the compart-

ment, while a light indicator a shows that you

need to ﬁll the compartment with rinse aid.

The rinse aid level adjuster can be set to a posi-

tion between 1 and 6. Factory setting for rinse

aid is the position 3.

You need to incre-

ase the degree of

the adjuster if wa-

ter stains form on

your dishes after a

wash, whereas you

need to decrease

the degree if a blue

stain is left when wiped by hand. 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

M-System MVW-600 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von M-System MVW-600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info