60
8 - GAS SECTION
The walls adjacent to the cooker must
be of material resistant to heat.
Before installation, make sure that
the local distribution conditions
(type of gas and its pressure) and
the adjustment of this appliance are
compatible. The appliance
adjustment conditions are given on
the plate or the label.
GAS CONNECTION
The connection must be executed by a
qualified tecnician according to the rele-
vant standards.
The appliance is predisposed and cali-
brated to operate with the gas indicated
on the specifications plate.
Ensure that the room in which the cook-
er is to be installed is ade-
quately ventilated, in com-
pliance with applicable
regulations.
Connection to the gas
supply pipe or gas cylin-
der must be made in
accordance with the
requirements of the
applicable regulations.
Cat: II 2L 3BP
INSTALLATION
The gases used for the operation of
cooking appliances may be grouped by
their characteristics into two types:
✓ G 25 ✓ G 30/ G31
– Connect the cooker to the gas mains
utilizing rigid or flexible pipes.
– The connection must be executed to
the rear of appliance (left or right) (fig.
8.1); the pipe do not cross the cooker.
– The unused end inlet pipe of the cook-
er (left or right) must be closed with
the plug interposing the gasket.
plug
Fig. 8.1
