782325
42
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
Cross cutting
> Remove the rip fence and place the mitre gauge in the mitre gauge groove on
the table.
> Raise the blade until it is approximately 1/8" (3.2 mm) above the top of the work
piece.
> Hold the work piece firmly against the mitre gauge, with the path of the blade
in line with the desired cutting line.
> Start the saw, and wait for the blade to reach full speed. Do not stand directly in
line with the saw blade’s path. Instead, stand on the side where the cut is being
made.
> Keep the work piece against the parallel profile of the mitre gauge and
flat against the table. Slowly push the mitre gauge with the work piece through
the blade.
> Do not attempt to pull the work piece backward while the blade is turning. Turn
the switch OFF, and wait until the blade has come to a complete stop before
carefully sliding the work piece out.
Rip small pieces
> It is not safe to rip small pieces. Instead, rip a larger piece in order to obtain the
size of the desired piece.
> When ripping a small work piece, it is not safe to place the hand between the
blade and the rip fence. Use one or more push sticks to push the work piece
completely past the blade.
42
Product functions
MSTS1500-A by MacAllister
In more detail…
EN
Warning: Risk of injury!
Avoid injury caused by contact with the blade. Do not use this
saw to make throughcuts that are narrower than 1/2” (13 mm).
Warning: Risk of injury!
If the distance between the rip fence and saw blade is less than
12 cm, the push stick must be used.
42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mac Allister MSTS1500-A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info