9
TECHNICAL DATA
RMS Power measured at 12.5 Volts DC:
Total maximum power 450 Watts
Front @ 1 kHz < 0.08 % THD into a 4 ohms load 2 x 45 Watts
Rear @ 1 kHz < 0.08 % THD into a 4 ohms load 2 x 35 Watts
Sub @ 50 Hz < 0.1 % THD into a 4 ohms load 1 x 80 Watts
Dynamic Power measured at 14.4 Volts DC:
Front @ 1 kHz < 0.1 % THD into a 4 ohms load 2 x 65 Watts
Rear @ 1 kHz < 0.1 % THD into a 4 ohms load 2 x 50 Watts
Sub @ 50 Hz < 0.1 % THD into a 4 ohms load 1 x 115 Watts
Front @ 1 kHz into a 2 ohms load 2 x 90 Watts
Rear @ 1 kHz into a 2 ohms load 2 x 70 Watts
Sub @ 50 Hz into a 2 ohms load 1 x 130 Watts
Crossover frequencies
High-Pass, Front/Rear Flat, 63 or 80 Hz
Low-Pass, Sub 50, 80 or 120 Hz
Crossover slope 12 dB/Octave
Frequency response ± 1 dB 10 - 50,000 Hz
Total harmonic distortion 0.08%
Signal-to-noise ratio (IHF A-weighted) > 100 dB
Input sensitivity/Impedance at 12.5Volt DC 200-4000 mV/20 kohms
Speakers’impedance 2 ohms min
Power supply 14.4 V DC (11-16 V allowed)
Weight 3.5Kg
Size 217(l) x 49(h) x 370(d) mm
Due to continuing improvement, the features and the design are subject to change without
notice.
O/M 45.40 (5T) 25/06/02 19:25 Page 9
