Bedienungsanleitung Macrom M-DL3200D (Seite 10 von 12) (Englisch)

677418

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

- 9 -

Bluetooth mode

Pairing

The bluetooth of this radio is always in standby mode for pairing and connection, signalled by a

blinking bluetooth icon on the LCD Display. At this blinking time, please run the bluetooth search

and connect function in your cellphone. The car radio model no “M-DL3200D” will be shown on the

cellphone. Select this car radio and connect to finish the pairing. The bluetooth icon on the display

will be on indicating that the connection is established. Bluetooth function is ready to use. *Pairing

password is required in some phones. Insert “0000” in such case.

Calling

In any play mode, dial the desired number on your cellphone. The unit will switch to bluetooth

handsfree mode automatically. “CALL OUT” will be shown on the display indicating the dialling is

in progress.

Answer calls

When there is an incoming call, the LCD will display the CALL IN prompt followed by the caller

number display. At this time, after pressing the “answer button”, the current talk time status

will be displayed. Rotate the volume knob during ringing or conversation to adjust the respective

volume level.

Rejecting calls

During ringing or conversation, press the “EJECT” button to end the call or reject the call. “CALL

END” will be shown on the display and the unit will resume to the original play mode.

BT Audio streaming (A2DP)

Press MOD/(with green phone logo) button until the unit entered BT AUDIO.

BT audio will play automatically when you play the song in the cellphone.

You could pause by “

> / II

” button, to choose previous or next song by pressing

|<<

and

>>|

button.

Disconnecting

Disconnect the paired phone by operating on the cellphone. You cannot process disconnection on

the car radio headunit.

Setting

Illuminations

The RGB menu has the following illuminations LED modes:

(AUTO)

(WHITE)

(PURP)

(CYAN)

(YELL)

(RED)

(BLUE)

(GREE).

(Factory default is LED AUTO). Press VOL knob repeatedly to enter the menu LED AUTO.

Rotate VOL to choose the color of your favorite light.

Steering Wheel Control

Press the volume knob repeatedly until the display shows SWRC. Rotate the volume knob to see

(MODE)

(VOL+)

(VOL-)

(MUTE)

(SEEK UP)

(SEEK D)

(EJECT)

(ACCEPT),

which represents different functions of the radio. In each function, press the volume knob to enter

SWC learning, for example, press the volume knob when the display shows MODE.

When PAIR is shown, press and hold the desired button in the steering wheel until display shows

PAIR OK. Proceed to the next function until all desired functions are set.

Note:

During the SWC setup, if the unit is idle for 5 seconds, the unit will return to the main GUI and user

has to repeat the above actions again.

M-DL3200D User manual_ENG.indd 9 23/07/2018 15:31:56

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Macrom M-DL3200D Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info