Device connections
Notes
negative grounding. Before installing this unit to a recreational vehicle,
a bus, or a truck, make sure the battery voltage is appropriate for this
unit to be used, otherwise, install a transformer by professional to
convert the output voltage to 12V.
To avoid short circuit in the electrical system, ensure that the negative
battery cable is disconnected before installation.
To prevent short circuit in the wiring and damaging to this unit, secure
all wirings with cable clamp or adhesive tape. Route the wirings in a
secured, out of heating place without touching any moving parts such
as gear shift, handbrake, and seat rails to prevent the wiring insulation
being melted / wore off.
Never pass the yellow power cord through the installation hole into the
engine compartment and connect to the car battery. Otherwise, a high
possibility of serious short circuit to the electrical system may be
occurred.
Replacing a new fuse with 10A rating when the old one is broken, using
no fuse or fuse with improper rating may cause damage to this unit or
even fires. If a proper fuse is installed and electrical problems still
occur, please contact with any professional car shops for inquiry.
D connect other equipments with the car battery to avoid battery
overheating.
Please make sure all the wiring connections & the cables of the
speakers are well-insulated. Otherwise, this unit may be damaged by
short circuit.
If there is no ACC available，Please connect ACC lead to the power
supply with a switch.
If an external power amplifier is connected, please don't connect
P.CONT lead to the power lead of the external power amplifier,
otherwise, electric spark or other damage may be resulted.
Never ground the speaker output to prevent the damage to the built-in
power amplifier.
The minimum rating of the speakers connected to this unit is 50W with
4 to 8Ω impedance.
of connection
O NOT
This unit is designed to be used in a vehicle with a 12-volt battery and
29
