GB-15
touch on < / > button on the touch screen.
2.2 Manual Tuning
There are three ways to tune in a station
manually as below:
press and hold << / >> button on the remote
control;
press and hold I<< / >>| button on the panel;
touch on < / > button on the touch screen.
3. Recalling a preset station
A total of 30 preset stations (18-FM, 12-MW) are
available in memory.
Press I<< / >>I button on the remote control OR
press AMS button to recall a preset station.
The display shows the preset number and
frequency of the stored station; touch one of these
to select a corresponding station.
Note: Press any one of the station preset buttons on the
remote control also to select the preset stations.
4. Store stations
4.1 Auto store
It is a function for storing up to 6 stations.
Follow the two steps:
Select the desired band;
Hold down AMS button, the stations with good
reception are stored automatically.
4.2 Manual store
To turn in a station to be stored in the preset
memory, press and hold any one of the preset
buttons (1-6) to store on.
*If a new station will be stored in a preset
memory which already has a station, the
current station will be cleared and replaced by
the new station.
5. DX/LOC Selector
In radio mode, press LOC button on the remote
control to select strong or weak station reception.
5.1 LOC
When LOC displays on the touch screen, only
strong signal stations will be tuned.
5.2 DX
When there is no LOC displays on the touch
screen, both strong and weak stations can be
received.
Note: The initial mode is DX mode.
6. MO/ST Selector
In FM of radio mode, you can press ST button on
the remote control to select Mono mode or Stereo
mode.
7. EXACT STATION SELECTION
7.1 Press number buttons (1-6) on the remote
control to select the six preset stations.
7.2 To select the exact station, press GOTO button
on the remote control then enter the exact
frequency numbers.
