162160
90
Zoom out
Zoom in
Vorherige Seite
1/98
Nächste Seite
Preferences
87
1. Press MENU.
2. Use the Arrow joystick to highlight Preferences.
3. Press ENTER.
4. Use the Arrow joystick to highlight Reset Default.
5. Press ENTER.
6. Use the Arrow joystick to highlight All.
7. Confirm. Use the Arrow joystick to highlight Yes to confirm or No to cancel.
8. Press ENTER.
Alarms that you can set:
Anchor - When you set the anchor alarm on, the eXplorist will alert you
when it has moved a distance you have selected. This could be used
when you have anchored your boat and need to be alerted if it has drifted
from it’s anchor point.
Arrival - The arrival alarm alerts you when you have arrived to the
destination of each leg in your route or to a GOTO destination. You will
need to set the distance that you want to be alerted. (Arrival alarms also
use the speed you are traveling as a minor factor in computing when to
provide the alarm. If you have set the Arrival alarm to 250 feet and are
traveling at 30 mph, the alarm will sound slighting before the 250 foot
mark.)
Off Course - When a route is active, the eXplorist computes when you have moved left or right of the
plotted route. You can set a distance, left or right of the plotted route, that when you exceed this
distance you will be alerted by an alarm.
GPS Fix - The GPS fix alarm is displayed when you have lost your GPS fix for more than 20 seconds.
Proximity Alarm - The proximity alarm is very similar to the arrival alarm except that it factors in speed
at a higher level than the arrival alarm. The proximity alarm has two alerts. First, when you are
nearing the proximity alarm distance selected and second, a visual proximity alert when you are at the
distance selected.
At the bottom of the display is a field that will display information about all alarms that have been triggered
since the eXplorist was last turned on.
Note: When an alarm is displayed, press ESC to clear the alarm from the screen.
Resetting the eXplorist to Factory Defaults
Setting Alarms
90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Magellan explorist 210 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Magellan explorist 210

Magellan explorist 210 Bedienungsanleitung - Holländisch - 110 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info