Bedienungsanleitung Magellan Explorist 710 (Seite 43 von 51) (Englisch)

474972

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

Magellan eXplorist Tools

Magellan eXplorist 510 / 610 / 710 User Manual 34

Waypoint Projection

A waypoint can also be created by entering the

distance and heading for the waypoint from your

current location.

Projecting a Waypoint

1. Tap on the Map screen.

2. Tap on the Main Menu icon in the lower left

corner.

3. Tap on the Waypoints icon.

4. From the Waypoint List, tap on the Options

Menu button in the lower right corner.

5. Tap on Add Waypoint.

6. Tap on Projection.

7. Tap on the Bearing eld. Use the keypad to

enter the degrees that the projected waypoint

is from your current position.

8. Tap on OK.

9. Tap on the Distance eld. (Note that you can

tap on the units of measure drop-down menu

to change the units to be used.

10. Use the keypad to enter the distance from

your current location that you want to project a

waypoint.

11. Tap on OK.

12. Tap on Next>.

13. The Waypoint Description page is displayed.

Make the necessary edits and tap the Disk

icon at the bottom to save.

Best Fishing & Hunting Times

This tool displays the best hunting and shing times

for your current location.

Using Best Fishing & Hunting Times

1. Access the Tools Menu.

2. Tap on the Fish & Hunt button.

Tap on the calendar and the arrows to the left

and right of the month to select a day to view.

Sun & Moon Rising and Setting Times

This tool displays the sun and moon rise and setting

times for your current location.

Using Sun & Moon Times

1. Access the Tools Menu.

2. Tap on the Sun & Moon button.

Tap on the calendar and the arrows to the left

and right of the month to select a day to view.

Geofencing

Select the map object to create an imaginary fence

around and be alerted when you are within the

perimeter of the boundary or on the boundary.

Setting Up Geofencing

1. Access the Tools Menu.

2. Tap on the Geofencing button.

3. Select “Add Geofence”. (If you currently have

a geofence dened, go to the Options Menu

and select “Add Geofence”.

4. Select the map object from the list provided.

5. Set up the geofence by turning the border

alert on or off, the proximity alert on or off, the

distance for the proximity alert and if you want

the geofence displayed on the map.

6. The geofence will be added to the list of

created geofences. Just tap on one of the

geofences in the list to change the settings.

Alarm Clocks

Use this tool to have the eXplorist to alert you for

sunset time, sunrise time or a time that you dene.

Setting the Alarm Clock

1. Access the Tools Menu.

2. Tap on the Alarms button.

3. If there are no alarms saved, select the type of

alarm you want to add.

Use the Time Alarm screen to set a name for

the alarm, the sound used for the alarm and

the time for the alarm to be played.

Tap the ON/OFF button to toggle the current

status of the alarm.

Press the Disk icon to save the alarm.

4. If there are alarms saved, you will be given a

list of the available alarms. Tap the left side

of the alarm button to toggle it on and off. Tap

the right side of the alarm button to modify

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Magellan Explorist 710 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Magellan Explorist 710

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info