REMOVING THE TRAY
To remove the tray, slide it towards the left as far as it will go. Raise the plastic tab
situated underneath the tray, at the lowest end. Pull the tray free from the slide.
To replace the tray, insert the two plastic tabs into the slide, underneath the slicer
base. Slide the tray towards the right, then raise the tab at the lowest end to lock it
into position.
REMOVING, CLEANING AND REPLACING THE BLADE
• Unplug the appliance.
• Using a coin, loosen the screw (6) at the centre of the blade,
turning it in a clockwise direction.
• Handle the blade with care - if possible, wear protective gloves.
• Remove the washer located behind the removable screw.
When replacing it, check that it is correctly aligned.
• Wipe the blade, the tray, the food grip and the appliance with a
damp cloth. Never use or poor water on the appliance.
• Replace the blade, the washer and the screw, holding them in
place with your finger, then tighten the screw in an anticlock
wise direction using a coin, making sure that the centre screw is
not over tightened.
8
UNITED KINGDOM AND IRELAND
19 Bridge Street - Godalming, Surrey GU7 1HY
Telephone: 01483 427411 - Fax: 01483 427414
We reserve the right to alter at any time without notice the technical specifications of this appliance.
© All rights reserved for all countries by Magimix
Réf: 460 032 - 01/06 - Trancheur 190
!
As the blade is extremely sharp, always use the food grip, especially
when slicing small quantities.
www.magimix.com
This symbol indicates that this product should not be treated as regular household
waste. It should be taken to a collection point for the recycling of electrical and electronic
equipment. For more details about collection points, please contact your local council
or your household waste disposal service.
