Bedienungsanleitung Magimix m 150 (Seite 16 von 25) (Englisch, Holländisch, Französisch)

361268

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

insert the empty capsule holder into the spout ring,

place a receptacle under the coffee spout and run

the equivalent of one or two large cups of water

by turning the function knob to the position on

the right. Return the function knob to the «0» posi-

tion. Once the yellow temperature control light

goes off, the machine is ready for use.

Heating liquids (18)

You can also heat liquids thanks to the steam /

hot water nozzle on this machine.

●

Verify that the function knob is on the «0»

position.

●

Turn on your machine by pressing the

On/Off Switch to .

●

Press the steam / hot water switch to the

position. Once the yellow temperature control

light goes off, the machine is ready for use.

●

Slide the tube of the frothing attachment up

3-5 mm.

●

Plunge the steam nozzle into the receptacle

containing the liquid to be heated and turn the

function knob to the position on the left

(18).

The yellow temperature control light will go on.

●

Maintain the end of the nozzle under the sur-

face of the liquid during the entire procedure

ensuring that it does not touch the base of the

receptacle.

●

Stop the steam by turning the function knob to

the «0» position. The yellow temperature

control light will go off.

●

Remove the receptacle and pivot the steam

nozzle over the drip tray.

●

Wipe the steam / hot water nozzle with a

clean damp cloth immediately after its use.

Important: To extract a espresso after having used

the steam, let the machine cool down. To do this,

insert the empty capsule holder in the spout ring,

place a receptacle under the coffee spout and run

the equivalent of one or two large cups of water

by turning the function knob to the position on

the right. . Return the function knob to the «0»

position. Once the yellow temperature control light

goes off, the machine is ready for use.

Preheating Cups

It is highly recommended that you preheat the

cups with very hot water before making the first

espresso of the day. Subsequent cups can be pre-

heated by stocking them on the cup heating plate.

●

To preheat cups with the steam / hot water

nozzle, follow the instructions given under the

section on: “Preparing Hot Water”.

Cleaning (19-21)

●

After the extraction of each espresso or the

use of the steam / hot water nozzle, residual

water in the thermoblock is discharged into

the drip tray provoking a light hissing noise.

It is therefore necessary to remove the grill

and empty the drip tray

(19) after about 20

coffees and, at same time, to clean them with

a non-abrasive, dish washing liquid.

●

Before reinserting the drip tray and grill,

ensure that the back cover of the drip tray is

properly in place

(20).

●

The capsule holder must be rinsed frequently.

Either run hot tap water through it or simply

insert the empty capsule holder in the spout

ring and let water run through it while slightly

loosening and re-tightening the capsuleholder

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Magimix m 150 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info