Setting the language
Press the key /P until LANGUAGE appears
on the display. Press the key /«+» or /«-»
to access this programming point. Now press
the key /«+» or /«-» until the desired
language appears. Confirm the entry by
pressing the key /P. You may choose
between D/F/I/E/NL/Sp/Port.
Messages on the display
WAIT
The machine has not yet reached the necessary
operating temperature.
READY
The machine has reached the necessary operating
temperature. You can now begin to prepare coffee.
FILL WATER
Water tank empty. Please add water.
WATER
Displayed when water is being drawn off
LARGE
Displayed when a large cup is being filled
SMALL
Displayed when a small cup is being filled
WAIT STEAM
You have pressed the steam key. The machine
is warming up.
STEAM READY
The machine has reached the necessary working
temperature. Now you can draw off steam.
STEAM
Displayed when steam is drawn off.
TOO HOT
This message is displayed when you wish to
serve coffee immediately after preparing steam
without the temperature having fallen. To cool
the machine down, proceed as described under
«Steam preparation.»
TAP CLOSE
When you draw off warm water to reduce the
steam temperature, this message is displayed
after the machine has automatically interrupted
the process of drawing off water.
ENOUGH COFFEE?
This message appears when the cup filling quan-
tity is being programmed.
CHECK-UP
Service message.
- Make sure that there is enough water in the tank.
- Clean the capsule holder as described under
«Cleaning»
- Press the key or with the capsule holder
inserted but without coffee capsules; When
READY is displayed on the display you can
prepare your coffee normally. If the message
does not disappear
- clean the needle cage as described under
«Cleaning».
Making espresso (10-12)
To obtain optimal coffee quality, preheat the
machine daily with the empty capsule holder
and rinse the system before making the first and
after the last Nespresso of the day. Do this by
pressing the button (9).
●
Fill the tank with fresh water. To preheat the
capsule, leave it in position on the capsule
cage (but empty, i.e. without a capusle)(1-3)
●
Switch the machine on by pressing the
key . WAIT is displayed on the display.
When READY appears on the display the
machine has reached the necessary opera-
ting temperature;
●
Remove the capsule holder
●
Fit the capsule head downwards in the
capsule holder. The capsule contains the
right quantity of coffee for one cup of
espresso (10).
●
Replace the capsule holder on the capsule
cage and tighten until the handle is facing
you or slightly offset towards the right
●
Place the preheated cup (see «preheating
cups») under the «coffee» outlet
●
Depending on the choice of cup, (large or
small), press or (11).
LARGE or SMALL now appears on the
display and preparation of the espresso
begins. The machine is set in the factory for
0.5 dl of coffee
1.0 dl of coffee
●
The machine stops automatically when the
desired filling level is reached. READY
appears on the display.
●
Remove the full cup, remove the capsule
holder and the used capsule (12)
To ensure that the quality of your next cup of
espresso is ideal, replace the empty capsule
holder on the capsule cage to retain the heat.
Setting the cup filing
quantity
You can easily change or adjust the cup filling
quantity set in the factory.
●
Proceed as described under «Making
espresso» up to «replace the capsule holder
on the capsule cage.»
●
Now place the cup for which you wish to set
the filling quantity automatically under the
coffee outlet
●
Decide whether it is to be programmed
by means of the key or the key
●
Press the appropriate key until ENOUGH
COFFEE ? appears on the display. Release
the key. As soon as the cup filling level has
been reached, press the key again and the
word READY appears on the display
●
Proceed in exactly the same way to adjust
the cup filling quantity, i.e. or
●
You can reduce the filling quantities set in the
factory or those you have programmed your-
self by briefly pressing either of the keys
or before the automatic cutout occurs. This
will not affect the programmed settings.
Note: if a power failure occurs, the values set in
the factory and those programmed by you are
memorized.
Making hot water (13)
This machine enables you to prepare hot water
for tea, bouillon etc.
●
Fill the water tank and connect the machine.
When READY appears on the display, place
a receptacle under the hot water nozzle
●
Turn the switch to the right on the machine
control box towards you to position .
WATER appears on the display.
●
As soon as the desired quantity of water has
been obtained, return the switch to its initial
position
WARNING! The steam/hot water
nozzle is very hot
Use of steam (14-16)
Steam can be used to foam milk for cappuccino.
For this purpose your machine has a special foam
device which guarantees ideal results. The steam
can also be used to heat liquids. Proceed as follows.
Note: Before making steam, remove the used
capsule from the capsule holder to prevent the
coffee from drying and clogging the coffee out-
let opening.
Heating liquids (14,15) (such as cold milk)
●
Fill the water tank, start the machine with
the , press the key . WAIT STEAM
appears on the display. The necessary
operating temperature is reached when
STEAM READY appears.
ENGLISH
ENGLISH
