English
61
The appliance must have been switched off and left to cool down at least 2 hours
beforehand.
1
st
phase : descaling
1. Fill the tank
1
/
3
full with fresh water and then add the descaler
(never in the reverse order), according to the instructions on the
packet.
2. Without switching the appliance on, press the button for
approx. 3 sec.
The following lights will appear : .
3. Empty the grounds tray and the drip tray, then replace them.
The following lights will appear :
.
4. Descaling the nozzle side :
- Place a fairly large container under the nozzle.
- Turn the Hot water/steam selector to , the following lights
will appear :
.
The descaling liquid will be pumped through the circuits at
short intervals to dissolve the limescale.
After a number of minutes, the following lights will appear :
.
- Empty the container, remove and then replace the trays,
therefore the following lights will appear :
.
5. Descaling the flow head side :
- Turn the selector back to 0 : .
After a number of minutes :
.
NB : the water will flow directly into the drip tray.
1
/
3
