616524
39
Zoom out
Zoom in
Vorherige Seite
1/156
Nächste Seite
Import 39
File options: Here you can determine whether all of the CD tracks will be imported as
a single file or each track as a separate file. In the case of separate files you can select
from various file name schemes in the list field.
Import: This closes the settings dialog and starts the import process. The changes to
the settings will be applied to any subsequent imports.
LP/Cassette/Speech recording
In these views music or speech from an analog source can be recorded. The controls
are the same in all views but certain settings are adjusted depending on the medium
being used.
To record from analog sources proceed as follows:
1. Connect the recording source now if you haven't already done this.
2. Switch to the corresponding import view (in this example "LP") and play back
the audio from the source to set the level. It is best to use a loud section for
this.
3. Adjusting the recording level is essential when recording digitally via sound
cards in order to achieve optimum sound quality. The level control can be
checked using the „Recording level” LED chain (1). They should not move
beyond the "safe" area. If the level moves into the "too loud" or "too quiet"
areas, correct it with the yellow level fader (2). But be careful. If you lower the
input level, you also lower the precision of the resolution with which the analog
signal is digitized. For this reason the fader should also be set as loud as
possible.
4. Now check the threshold values for automatic CD track recognition. To do this,
play back one song until the end and into the pause. The level must fall under
the green zone (3) so that the next song will be recognized. Correct the
threshold value if necessary.
5. The recording function in the import section is reduced to only the most
important features. For recordings in other file formats and various other
options you can access these features in the "Settings..." (4) the Record
settings (view page 41) dialog.
6. You can start the actual recording with the large red record button (5). The
duration of the recording and the remaining storage capacity is displayed on
39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

magix-audio-cleaning-lab-2014

Suche zurücksetzen

  • scherenfunktion ist permanent aktiv, läßt sich nicht deaktivieren Eingereicht am 13-8-2018 09:17

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Magix Audio cleaning lab 2014 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info