616524
58
Zoom out
Zoom in
Vorherige Seite
1/156
Nächste Seite
58
www.magix.com
Marker DeClicker
Along with normal crackling on a vinyl recording, there can be some more noticeable
noises on a record which is scratched. If the DeClicker is set very high for those
sections which are particularly noisy, it can lead to several components of the wanted
signal being affected by the DeClicker if they exhibit similar characteristics as the
noise.
To avoid this we recommend setting the DeClicker at a lower setting and removing
the sharper pops and clicks with the help of the Marker DeClicker. These sections can
be set using a click marker (SET). The special "Marker DeClicker" affects the audio
material only at these positions and the normal DeClicker can be set at a weaker level
to avoid compromising the audio material.
"SEARCH" allows you to search the entire project for especially strong clicks and have
them marked automatically. With the "SENSITIVTY" controller you can set the
sensitivity of the search. If the this is set high, more clicks will be found.
DeCrackler
The DeCrackler has been specifically developed to remove crackling noises from old
records. Loud, individual click sounds can be removed more easily with the DeClicker.
DeClipper
If the input level of an audio recording is too high, distortion may result at the louder
parts (the signal peaks). This digital distortion is also called "clipping". At the
overmodulated area, the values that are too high are simply cut off and the typical,
annoying crackling and distortions are heard.
MAGIX Audio & Music Lab 2014 Premium has a special function for dealing with
digital clipping.
Distorted sections are discovered and filtered out based on the material in the
selected object. Lastly, the master volume of the material can be reduced so that the
interpolated parts can be played back without distortion.
The DeClipping algorithm is particularly good for audio material with clearly audible
clipping, e. g. distorted piano or vocals. The sound of distorted drumbeats on the
other hand is hardly ever improved.
Clip Level: Here you can enter the level at which the algorithm register the samples as
distorted and corrects them if necessary. This is important because different sound
cards have different clipping characteristics.
58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

magix-audio-cleaning-lab-2014

Suche zurücksetzen

  • scherenfunktion ist permanent aktiv, läßt sich nicht deaktivieren Eingereicht am 13-8-2018 09:17

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Magix Audio cleaning lab 2014 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info