630079
265
Zoom out
Zoom in
Vorherige Seite
1/293
Nächste Seite
Appendix: MPEG Encoder Settings 265
www.magix.com
rt your video in the
corresponding format, for instance) for further use in other programs
or on your own website.
If you open the encoder from a burn dialog, or intend to use the
exported material for VCDs, SVCDs or DVDs, then select the
corresponding option. This will adjust the settings of the encoder
according to the standards required for the corresponding discs to
is encoded interlaced (i.e. in two half-
screens, so-called fields). This is essential for later playback on TV
and
rt playback of
progressively encoded image material. See
Interlace (on page 273).
Bit rate: The bit rate determines the memory requirement by the
differently for different display modes. 20 MB can be 4 seconds of
e.
The quality of an MPEG video is measured by the width of the
rocess, or the
quality of the
movement (on page 270) to be more precise. The
d video will look, but encoding
bly longer. The preset value "10" is a good
compromise between speed and quality.
Smart Rendering: Smart Rendering can considerably reduce the
encoding/processing strain of MPEG files. The production of MPEG
t, i.e.
the bit rates (variable or constant), audio formats, image resolutions,
and video formats must match.
Appendix: MPEG Encoder Settings
General settings
MPEG type: Set the output type of the created MPEG file. You can
adjust the encoder settings freely (to expo
be played in a compatible player.
Video format: Automatically specifies the video format, aspect ratio,
and frame rate (see
video settings (on page 266)). You can choose
between PAL or NTSC.
Interlace mode: The movie
screens. If you want to view the exported movie on your PC only
like a "cinemascope" view, you can also encode by frame
(progressively). Some video projectors also suppo
completed video. The amount of data available can be used
DVD video, or 5 minutes of Internet streaming at the thumbnail siz
created data stream, i.e. the bit rate. This is the amount of
transmitted data per time unit and is indicated in kBit/s or bit per
second.
Quality: Determines the quality of the encoding p
higher the quality, the better the finishe
will take considera
files re-encodes only those parts of the movie that were changed in
the program (e.g. by video cleaning or effects). Please note: The
MPEG files contained in the movie must have the same forma
265

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Magix Movie Edit Pro 15 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info