Bedienungsanleitung Magnat AD 300 Series II (Seite 5 von 20) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch)

581738

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

GBGB

DEAR CUSTOMER,

We congratulate you on acquiring this MAGNAT

Car Stereo Product.

Please read these instructions carefully so as

to ensure optimum and disturbance-free

functioning of the appliance. Technical

modifications reserved.

SUBWOOFER DIMENSIONS /THIELE-SMALL

PARAMETERS / TECNICALDATA

See pages 15

CABINET CONSTRUCTION SUGGESTIONS

See pages 16

CABINET CONSTRUCTION TIPS

When building a passive speaker cabinet, the

following points should be borne in mind:

1. Use 19 mm thick (or 22 mm is preferable)

chipboard or MDF to make the cabinets. For

particularly large cabinets or heavy woofers,

the baffle can be doubled (e.g. 2 x 19 mm).

2. Maximum stability is achieved by gluing the

boards together under pressure (wood glue)

and then screwing them together using wood

screws. The screws should be inserted at

approx. 10 cm intervals.

3. The specified dimensions of the bass reflex

tubes may fluctuate by a maximum of

10%.

4. After assembling the cabinet, make sure that it

is airtight; touch up with silicone if necessary.

5. Medium-thick polyester wool or foam insulation

is advisable for enclosed cabinets. Bass reflex

cabinets only require single insulation on the

internal walls of the cabinet. On no account

may the reflex opening be blocked.

POSITIONING AND SECURING THE

SUBWOOFERS

Ensure that the subwoofer cabinet rests on an even

surface. The cones (and, where applicable, the

bass reflex tube) should not be placed directly

against the car’s interior walls.

Make sure that the subwoofer is secured in

such away thatit cannotslipor slide.Damage

resulting from sudden changes in speed (e.g.

hardbraking)isnotcoveredunderthetermsof

our guarantee.

CONNECTING TO THE POWERAMPLIFIER

The subwoofer should be connected to an external

power amplifier in every case. This can provide the

required electrical power and create corresponding

dynamic reserves. The relevant instructions also

contain the customized connection diagram for the

operation of a subwoofer.

CABLES TO BE USED

To transport the output from the amplifier to the

subwoofer efficiently and reliably, you should bear

in mind when selecting the speaker cable that

2 x 4 mm² gauge wiring is required for cable lengths

in excess of 3 meters. 2 x 2.5 mm² cable is

sufficient for shorter runs. Lay the cable in such a

way that short-circuiting cannot occur, i.e. the cable

may at no time be jammed between metal parts.

Make sure that terminals on the speaker are

screwed tight and check their contact at regular

intervals.

SUBWOOFER POLARITY

Because of the different spatial conditions

prevailing in different vehicles, subwoofer polarity

can best be determined by trial and error. To do this,

choose some music material you know very well

and select the setting you like most. Some radios /

control units also offer the possibility of setting the

polarity on the appliance itself (phase). One

change in polarity corresponds to a phase shift of

180 degrees.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Magnat AD 300 Series II Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info