Level control (7)
This control is used to set the bass volume according to your preferences. Proceed as follows:
1. Set the bass control of your amplifier into its center (linear) position.
2. Important:Set the level control to its left stop (lowest volume).
3. Now, play back some music and set the volume control of the amplifier to the desired level.
4. Set the subwoofer level control to the desired bass level.
Cross-over frequency control (8)
Used to set the upper limit of the subwoofer operating range. The cross-over frequency should be set to
100 to 150 Hz when the system is used in combination with shelf loudspeakers or 50 to 100 Hz when
used with stand loudspeakers.
Fuse (1)
Only use a fuse with the parameters indicated next to the fuse holder on the rear of the amplifier.
IMPORTANT SAFETY NOTICE
Never subject the subwoofer to dripping or splashing water. Do not place any flower vases or other filled
recipients on top of the subwoofer.
The distance between the active subwoofer enclosure and the walls of the room or other objects (e. g.
furniture, shelf units) may not be less than 5 cm on any side.
The aluminium plate and cooling fins of the amplifier at the rear of the active subwoofer serve to cool the
built-in amplifier; for this reason, they must also be at least 5 cm away from all objects and must not be
covered (e.g. by a curtain).
The bass reflex opening(s) on the active subwoofer must not be covered (e. g. by curtains, etc.) in order
to guarantee adequate ventilation of the amplifier.
The active subwoofer may not be used in very humid rooms.
Please do not place any items with naked flames (e.g. candles) on the active subwoofer.
Please do not touch or connect the mains cable when your hands are damp. Keep the mains cable away
from heaters. Never place heavy items on the mains cable. The mains cable should always be freely
accessible.
SPECIFICATIONS
Monitor Supreme Sub 301A Monitor Supreme Sub 201A
Configuration: Powered bass reflex subwoofer, Powered bass reflex subwoofer,
"frontfire" construction "frontfire" construction
Fitted with: 30 cm long-stroke driver 20 cm long-stroke driver
Output power RMS/Max.: 100 / 220 watts 75 / 160 watts
Frequency range: 16 – 200 Hz 20 – 200 Hz
Cross-over frequency: 50 – 150 Hz 50 – 150 Hz
Dimensions (WxHxD): 335 x 440 x 395 mm 265 x 365 x 345 mm
Accessories: mains cable mains cable
SUBJECT TO TECHNICAL CHANGE.
