Bedienungsanleitung Magnavox 19ME360B (Seite 15 von 37) (Englisch)

494156

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

English

INTRODUCTION

PREPARATION

WATCHING TV

OPTIONAL SETTING

TROUBLESHOOTING

INFORMATION

These operations are accessible by remote control.

Some may also be accessible by controls on the main unit.

Initial Setup

This section will guide you through the unit’s initial setting

which includes selecting a language for your on-screen menu

and autoprogram, which automatically scans and memorizes

viewable channels.

Before you begin:

Make sure the unit is connected to antenna or cable.

1 After making all the necessary connections,

press

to turn on the unit.

• It may take a few moments to turn on the unit for the

first time.

• [Initial Setup] menu appears automatically after the

unit is turned on.

2 Use ɼ/ɾ to select the on-screen language from the

choices (English / Español / Français) on the right side of the

TV screen.

3 Use ɼ/ɾ to select [Antenna] for TV channels or [Cable]

for CATV channels, then press OK.

Initial Setup

Make sure the antenna is connected to ''ANT. IN'' jack.

Select your signal source.

Antenna

Cable

ANT.IN

Antenna

Cable

Skip

Select

BACK

Back

Skip

• [Autoprogram] will begin.

Initial Setup

Please wait while the system is scanning for channels. Auto programming

may take more than 20 minutes to complete.

Digital channels

0 ch

Analog channels

0 ch

Skip

4 Use ɿ/ɽ to select the desired location setting, then

press OK.

Initial Setup

Select “Retail” or “Home” for your location.

Retail

Home

Select

• Select [Retail] store, the unit will be set up with

predefined setting for retail displays. In this setting, the

power consumption may possibly exceed the limited

requirement of the ENERGY STAR

qualification.

• Select [Home], the unit is set to maximize the energy

efficiency for home setting and it can be adjusted

through a choice of picture and sound quality according

to your preference.

• When the initial setup is completed, the lowest

memorized channel with the confirmation message of

the location setting will be displayed on the TV screen.

Note

•

If you are not receiving a signal from your cable service, contact the Cable

provider.

•

If you press or MENU during autoprogram, this setting will be canceled.

•

The initial autoprogram function can be executed for either [Antenna] or

[Cable] only once. When you change the connection (Antenna / Cable),

set [Autoprogram] again.

➠

p. 19

•

If there is no signal input from the antenna terminal and no operation for

several seconds after you turn on the unit, [Helpful Hints] appears. Follow

the instructions listed on the TV screen.

Initial Setup

No channel is registered.

Try Autoprogram again?

Verify that you have a cable connected to the "ANT. IN" jack on the back

of the TV, the channel installation process searches this connection. If

you are using a cable or satellite box, please confirm the input which

you have connected the box and press "SOURCE" key on the remote

control to select the appropriate source input.

Retry

Later

Select

Skip

•

You must set [Home] in step 4. Otherwise, the settings of picture and

sound quality you adjusted will not be memorized after the unit goes to the

stand-by mode.

After an initial setup is completed...

• If you want to scan the channels automatically again.

[Autoprogram] ➠ p. 19

• You can add the desired cable and analog channels

unmemorized by autoprogram.

[Add Channels] ➠ p. 20

• If you want to change to another language.

[Language Selection] ➠ p. 21

• If you want to change the location setting.

[Location] ➠ p. 31

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Magnavox 19ME360B Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info