Bedienungsanleitung Magnavox 26ME402V (Seite 12 von 37) (Englisch)

494207

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

English

These operations are accessible by remote control.

Some may also be accessible by control panel on the main unit.

Initialsetup

This section will guide you through the unit’s initial setting which

includes selecting a language for your on-screen menu and autoprogram,

which automatically scans and memorizes viewable channels.

Before you begin:

Make sure the unit is connected to antenna or cable.

1 After making all the necessary connections, press to Turn On the

unit.

• It may take a few moments to Turn On the unit for the rst time.

• Initialsetup menu appears automatically after the unit is Turned

On.

2 Use ▲▼ to select the on-screen language from the choices

(English / Español / Français) on the right side of the TV screen, then

press OK.

3 Use ▲▼ to select Antenna for TV channels or Cable for CATV

channels, then press OK.

Initialsetup

Makesuretheantennaisconnectedto‘’ANTENNAIN’’jack.

Selectyoursignalsource.

Antenna

Cable

Antenna

Cable

ANTENNAIN

Skip

Select OK Back Skip

– When Antenna is selected, the TV detects antenna signals. It

searches for DTV and Analog TV channels available in your area.

– When Cable is selected, the TV detects signals supplied by cable. It

searches for DTV, Analog TV and Cable channels available in your

area.

• Autoprogram will begin.

Initialsetup

Pleasewaitwhilethesystemisscanningforchannels.

Autoprogrammingmaytakemorethan20minutesto

complete.

Digital channels

0ch

Analog channels

0ch

Skip

4 Use ▲▼ to select the desired location setting, then press OK.

Home is ENERGY STAR

qualied setting.

Initialsetup

LocationHomeisrecommendedfornormalhomeuse

andisENERGYSTARqualified.

IntheRetailStoremode,allsettingsarefixed.



Retail

Home

Select OK

• Select Retail, the unit will be set up with predened setting

for retail displays. In this setting, the power consumption may

possibly exceed the limited requirement of the ENERGY STAR

qualication.

• Select Home, the unit is set to maximize the energy efciency

for home setting and it can be adjusted through a choice of

picture and sound quality according to your preference. Use this

setting to remove the E-sticker if visible from the display.

➠

p.26

• When the initial setup is completed, the lowest memorized

channel with the conrmation message of the location setting

will be displayed on the TV screen.

• You must set Home in step 4. Otherwise, Picture and Sound

settings you adjusted will not be memorized after the unit goes

into Standby mode.

Note

• If you are not receiving a signal from your cable service, contact the Cable provider.

• If you press or MENU during autoprogram, this setup of TV channels will be

canceled.

• The initial autoprogram function can be executed for either Antenna or Cable only

once. When you change the connection (Antenna / Cable), set Autoprogram again.

➠

p.19

• If there is no signal Input from the antenna terminal and no operation for several

seconds after you Turn On the unit, helpful hints appears. Follow the instructions listed

on the TV screen.

Initialsetup

Nochannelisregistered.

TryAutoprogramagain?

Verifythatyouhaveacableconnectedtothe“ANTENNAIN”jack

onthebackoftheTV,thechannelinstallationprocess

searchesthisconnection.Ifyouareusingacableorsatellite

box,pleaseconfirmtheinputwhichyouhaveconnectedto

theboxandpress“SOURCE”keyontheremotecontrolto

selecttheappropriatesourceinput.



Retry

Later

Select OK Skip

After an initial setup is completed...

• If you want to scan the channels automatically again.

Autoprogram

➠

p.19

• You can add the desired cable and Analog channels

unmemorized by autoprogram.

Addchannels

➠

p.20

• If you want to change to another language.

Language

➠

p.26

• If you want to change the location setting.

Location

➠

p.26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Magnavox 26ME402V Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info