Bedienungsanleitung Magnavox 32ME402V (Seite 20 von 37) (Englisch)

494206

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

English

• When the scanning and memorizing are completed, the lowest

memorized channel will be displayed.

Autoprogram

Pleasewaitwhilethesystemisscanningforchannels.

Autoprogrammingmaytakemorethan20minutesto

complete.

75%

Digital channels

10 ch

Analog channels

6ch

Exit

Note

• After setting Autoprogram, using CH+/−skips unavailable programs automatically.

• If you are not receiving a signal from your cable service, contact the Cable provider.

• If you press or MENU during autoprogram, the setup of TV channels will be

canceled.

• Even if Autoprogram is completed, the channel setting will be lost if the AC power

cord is unplugged before the unit goes into Standby mode by pressing

• The PIN Code will be required once you set a PIN code in the Childandratingslock.

➠

p.22

• If you want to change your PIN code, follow the instruction of ChangePIN.

➠

p.24

Channellist

The channels selected here can be skipped when selecting the channels

using CH+/−.

Those channels can still be selected with theNUMBERbuttons.

1 Use ▲▼ to select Channellist, then press OK.

2 Use ▲▼ to select the channel you want to remove, then press

OK.

Picture DTV 11.1

Sound

Highlightchannelsfor

ChUp/Downkeyselection.

DTV 11.2

Setup

DTV 11.3

Features

Language

USB

ChSelect Watch/Skip Back

• The channel display for the removed channel darkens. You will

not be able to select the channel again using CH+/−.

• To reactivate a removed channel, use ▲▼ and press OK. The

registered channels are highlighted.

• When you remove a main channel, its subchannels are removed

as well.

Note

• The channel with DTV indicated on the display is ATSC. Otherwise the channel is

Analog TV.

Addchannels

This function lets you add the off the air Analog TV or Analog Cable

channels that were not added by the autoprogram due to reception

conditions during the initial setting.

1 Use ▲▼ to select Addchannels, then press OK.

2 Use theNUMBERbuttons to enter the number of the channel you

want to add, then press OK.

Picture Add channels

Sound

Foranalogchannels,selecta

channeltobeaddedusing

numberkeys.

Fordigitalchannels,youmust

performAutoprogramfunction.



Setup

Features

Language

USB

ChChange Back

Note

• If setup completes successfully, Addedtothechannellist. is displayed.

• If external Input is used, it is not possible to register the channel and Unavailable will be

displayed on the TV screen.

• Some channels cannot be selected by CH+/−. Use theNUMBERbuttons to select

the memorised channels.

Antennaconrmation

DigitalTVoperation

This function lets you check the Digital signal strength of each channel.

1 Use ▲▼ to select Antenna, then press OK.

2 Use theNUMBERbuttons or CH+/−to select the channel for

which you want to check the Digital signal strength.

Picture Back

Sound

Setup

Current 50

Max 50

Features

Language

USB



ChChange

Note

• If the channel is set to Analog channel or external Input, you cannot conrm the

antenna condition.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Magnavox 32ME402V Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info