Bedienungsanleitung Magnavox 32MV402X (Seite 13 von 55) (Englisch)

494147

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

English

These operations are accessible by remote control.

Some may also be accessible by control panel on the main unit.

Initialsetup

This section will guide you through the unit’s initial setting which

includes selecting a language for your on-screen menu, country, location

and AutoProgram, which automatically scans and memorizes viewable

channels. You can also set the network connection in this setting.

Before you begin:

Make sure the unit is connected to antenna or cable.

1 After making all the necessary connections, press to Turn On the

unit.

• It may take a few moments to Turn On the unit for the rst time.

• Initial setup menu appears automatically after the unit is Turned

On.

2 Use ▲▼ to select the on-screen language, country, location on the

right side of the TV screen, then press OK.

• You must set Home in location setting. Otherwise, Picture and

Sound settings you adjusted will not be memorized after the unit

goes into Standby mode.

3 Use ▲▼ to select the signal type.

• If the TV is connected to a cable box or satellite set-top box,

select the 2nd one and skip to step 5.

TosetupaTVsignalfromacableTV

walljackorastandardTVantenna.



Select

TosetupaTVsignalfromacableTV

boxorsatelliteTVreceiver.



Select

4 Use ▲▼ to select Antenna for TV channels or Cable for CATV

channels, then press OK.

Makesurethatyouhave

attachedyourantennaorcable

signalintothejackontheback

ofyourTVlabeled“ANTENNA.IN”.



NowselecteitherAntennaor

Cable,usingup/downkeyofthe

remotecontrol.Onceyouhave

madeyouselection,pressthe

OKbuttontoproceed.



Antenna

Cable

Skip

– When Antenna is selected, the TV detects antenna signals. It searches

for DTV and Analog TV channels available in your area.

– When Cable is selected, the TV detects signals supplied by cable. It

searches for DTV, Analog TV and Cable channels available in your

area.

• Autoprogram will begin.

Systemsearching.Pleasewait...

Digitalchannelsfound: 0

Analogchannelsfound: 0

Autoprogrammingmaytakemorethan20minutesto

complete.DigitalchannelswilltakelongerthanAnalog

tofindandprogram.Pleasewaituntilyousee

theAutoProgrammingcompletemessage.



Stop

5 After the channel installation is completed, Network setup screen

will appear. Use ▲▼ to select Wireless or Wired, then press OK.

ThisTVcanbeconnectedto

yourhomenetwork.

Selectyourconnectiontype.

Wireless

Wired

Skip

Wireless

If you have a Wireless router, select Wireless to

connect to the Internet.

Wired

If you connect with an Ethernet cable, select

Wired to connect to the Internet.

• If you have a router with WPS function, select Wireless and use

▲▼ to select Simpleconnect, then press OK.

6 Follow the on-screen instructions to complete the installation.

• When you select On in the selection screen of

Autosoftwareupdate. A message will appear if there is the

latest software on the network server.

• Networkupdates will appear after Connectiontest succeeds.

Use ◄► to select Yes, then press OK.

• When the initial setup is completed, the lowest memorized

channel with the conrmation message will be displayed on the

TV screen.

Note

• If you are not receiving a signal from your cable service, contact the Cable provider.

• If you press

during AutoProgram, this setup of TV channels will be canceled.

• The initial AutoProgram function can be executed for either Antenna or Cable only

once. When you change the connection (Antenna / Cable), set Autoprogram again.

➠

p.28

After an initial setup is completed...

• If you want to scan the channels automatically again.

Autoprogram  

➠

p.28

• You can add the desired cable and Analog channels

unmemorized by AutoProgram.

Weakchannelinstallation 

➠

p.28

• If you want to change to another language.

Language

➠

p.27

• If you want to change the country setting.

Country

➠

p.15

• If you want to change the location setting.

Location

➠

p.29

• If you want to change the network setting.

Network

➠

p.31

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Magnavox 32MV402X Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info