Bedienungsanleitung Magnavox 37MD350B (Seite 17 von 57) (Englisch)

494217

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

INTRODUCTION

PREPARATION

WATCHING TV

OPTIONAL SETTING

OPERATING DVD DVD SETTING TROUBLESHOOTING

INFORMATION

55 Initial5Setup

This section will guide you through the unit’s initial setting which includes

selecting a language for your on-screen menu and autoprogram, which

automatically scans and memorizes viewable channels.

Before you begin:

Make sure the unit is connected to antenna or cable.

After making all the necessary connections,

press [y (power)] to turn on the unit.

• This operation may take a few moments.

Use [Cursor

] to select the on-screen language

from the choices on the right side of the TV screen.

(English / Español / Français)

Initial Setup

Select the language for setup display.

Elija el idioma de ajuste.

Sélectionner langue écran config.

Español

Français

Select Skip

English

• “Initial Setup” menu on step 3 will be displayed in the

selected language after you press [OK].

Use [Cursor

] to select “Antenna” for TV channels

or “Cable” for CATV channels, then press [OK].

Initial Setup

Select Skip

MENUBACK

BackOK

Make sure the antenna is connected to ''ANT. IN'' jack.

Select your signal source.

Cable

Skip

Antenna

ANT.IN

Cable

Antenna

• “Autoprogram” will begin.

Initial Setup

Now the system is scanning for channels, please wait.

Auto programming will take up to 20 minutes to complete.

Skip

Analog channels 0ch

Digital channels 0ch

Use [Cursor

] to select the desired location setting,

then press [OK].

Initial Setup

Select “Retail” or “Home” for your location.

Retail

Home

Select

• Select ”Retail”, the unit will be set up with predefined

setting for retail displays.

• Select ”Home”, the unit is set to maximize the energy

efficiency for home setting and it can be adjusted

through a choice of picture and sound quality

according to your preference.

• When the initial setup is completed, the lowest

memorized channel with the confirmation message

of the location setting will be displayed on the TV

screen.

• You must set ”Home” in step 4. Otherwise, the

settings of picture and sound quality you adjusted

will not be memorized after the unit goes into

standby mode.

Note:

• If you are not receiving a signal from your cable service,

contact the Cable provider.

• If you press [

y (power)] or [MENU] during autoprogram,

this setting will be canceled.

• The initial autoprogram function can be executed for

either “Antenna” or “Cable” only once. When you change

the connection (Antenna / Cable), set autoprogram again.

Refer to page 22.

• If there is no signal input from the antenna terminal and

no operation for several seconds after you turn on the unit,

“Helpful Hints” appears. Follow the instructions listed on

the TV screen.

Initial Setup

Select Skip

No channel is registered.

Try Autoprogram again?

Verify that you have a cable connected to the "ANT. IN" jack on the

back of the TV, the channel installation process searches this

connection. If you are using a cable or satellite box, please confirm

the input which you have connected the box and press "SOURCE"

key on the remote control to select the appropriate source input.

Later

Retry

After an initial setup is completed...

• If you want to scan the channels automatically again,

refer to “Autoprogram” on page 22.

• You can add the desired channels unmemorized by

“Autoprogram”. Refer to “Add Channels” on page 23.

• If you want to change to another language, refer to

“Language Selection” on page 24.

• If you want to change the location setting, refer to

“Location” on page 35.

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

TV Functions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Magnavox 37MD350B Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info