Bedienungsanleitung Magnavox MBP110V (Seite 29 von 48) (Englisch)

494140

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

29EN

PLAYBACK

1 During playback, press [AUDIO].

2 Use [K / L] to select your desired audio stream

channel.

• For audio CD, you can select following options.

3 Press [AUDIO] to exit.

There are 2 options for the “BD Audio Mode” setting; either

by setting the output to the secondary and interactive

audio accompanied by the primary audio or by setting

only the primary audio. Depending on the setting of the

mode, Dolby Digital, Dolby Digital Plus, Dolby TrueHD,

DTS, or DTS-HD output changes between multi LPCM and

bitstream.

1 In stop mode with BD inserted, press [MODE].

2 Use [K / L] to select your desired setting.

“Mix Audio Output”:

If it is available, BD-video’s secondary and interactive

audio will be output with the primary audio.

• The secondary audio is the audio for the secondary

video (Director’s comment etc.) and the interactive

audio is the audio for the interactive application

(Button click sounds etc.).

“HD Audio Output”:

Only the primary audio will be output. Set this mode in

order to output , Dolby Digital Plus, Dolby TrueHD, or

DTS-HD audio of BD through HDMI connection.

3 Press [RETURN] to exit.

• You can also set “BD Audio Mode” from the setup

menu. Refer to page 31.

• Refer to “Audio signals output from HDMI OUT jack”

on page 35 and “Audio signals output from DIGITAL

AUDIO OUT (COAXIAL) jack” on page 36 for how BD

Audio will be output.

“Stereo” : Both right and left channels are active

(stereo).

“L-ch” :Only left channel is active.

“R-ch” : Only right channel is active.

Note

• The secondary audio will not be output when the

secondary video is not displayed or when “BD Audio

Mode” is set to “HD Audio Output”. (For some BDs,

secondary audio will be output even when

secondary video is off.)

• The sound mode cannot be changed during

playback of discs not recorded in multiple audio.

• Some discs allow changing the audio language

setting on the disc menu. (Operation varies

depending on the discs. Refer to the manual

accompanying the disc.)

• [AUDIO] may not work on some discs with multiple

audio streams or channels (e.g. DVDs that allow

changing audio setting on the disc menu).

• If you select a language that has a 3-letter-language

code, the code will be displayed every time you

change the audio language setting. If you select any

other languages, “---” will be displayed instead.

(Refer to page 44.)

• Audio Language selection cannot be made during

rapid playback. (Refer to page 25.)

• If 4-digit-language code appears in the audio menu,

refer to page 44.

• If the disc has no audio language, “Not Available” will

be displayed on the TV screen.

• For DTS-CD (5.1 music disc), selecting audio streams

or channels is not available.

/ 3

48k

ENG

Dolby D

3/2.1ch

e.g.) DVD-video

Setting the BD Audio Mode

Note

• In “Mix Audio Output” mode, if there is no secondary

and interactive audio, the audio will be output as

“HD Audio Output” mode.

BD Audio Mode Mix Audio Output

INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP VCP FUNCTIONS

OTHERS

E8M00UD_EN.book Page 29 Thursday, July 15, 2010 10:01 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Magnavox MBP110V Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info