Bedienungsanleitung Magnavox MBP5320 (Seite 42 von 63) (Englisch, Spanisch)

494145

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

EN - 42

6. Use [] to select “Auto” or “Manual”, then press [OK].

• If you select “Auto”, follow step 4 in “Auto (Wired)” on page 38.

• If you select “Manual”, follow steps 3 to 13 in “Manual (Wired)” on page 39.

D Note

• The internal wireless LAN supports following specifications.

- Wireless standards: IEEE 802.11 b/g/n

- Frequency: 2.4 GHz

- Security protocol: WEP* / WPA / WPA2

* “WEP” is not recommended to be used due to its “Major security flaws”. Change the Security protocol on the wireless

router to “WPA” or “WPA2 (recommended)” mode.

Manual (Wireless)

Set up the connection to the wireless router manually by entering the SSID.

In the following cases, select “Manual” to set each setting as necessary.

- When connection test failed with the setting of “Auto Scan”.

1. Follow steps 1 and 2 in “Push Button Method” on page 40.

2. Use [] to select “Manual”, then press [OK].

3. SSID entry screen will appear. Enter the SSID using the Cursor buttons, the Number buttons and the Color keys, then

press [RED].

4. Security mode selection screen will appear. Use [] to select the desired Security mode, then press [OK].

• If you select “None”, please go to step 6.

5. “WEP / WPA / WPA2 Key” entry screen will appear. Enter the WEP / WPA / WPA2 password of the selected wireless

network using Cursor buttons, Number buttons and Color keys, then press

[

RED

]

to confirm the password.

• If you do not know the WEP / WPA / WPA2 key for your wireless network, please confirm the sticker on the router.

• The WEP / WPA / WPA2 key entries are case-sensitive.

6. Use [] to select “Next”, then press [OK].

7. Use [] to select “Auto” or “Manual”, then press [OK].

• If you select “Auto”, follow step 4 in “Auto (Wired)” on page 38.

• If you select “Manual”, follow steps 3 to 13 in “Manual (Wired)” on page 39.

 Network Status / Wireless Status

You can check the current status of network status and wireless status.

1. Follow steps 1 and 2 in “Connection Test” on page 38.

2. Use [] to select “Network Status” or “Wireless Status”, then press [OK].

• The current network settings or wireless router setting will be displayed.

3. Press [HOME] to return to the Home Menu.

 Netflix ESN

You can view the ESN (Electronic Serial Number, which Netflix uses to identify your device). Netflix customer service

might ask you for this number during troubleshooting.

1. Follow steps 1 and 2 in “Connection Test” on page 38.

2. Use [] to select “Netflix ESN”, then press [OK].

3. Press [HOME] to return to the Home Menu.

Access Point Setting

Please select the security mode.

None

WEP

WPA-PSK (TKIP)

WPA-PSK (AES)

WPA2-PSK (AES)

WPA2-PSK (TKIP)

Return

Cancel

3 / 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Magnavox MBP5320 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info