534675
33
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
Run Startup Script. This entry launches
the startup script. The Startup Script runs
automatically the first time you power on the
MakerBot Replicator 2X. The Startup Script
walks you through the steps for leveling your
build plate, loading filament into the right
extruder, and printing from the SD card. To exit
the Startup Script, press the le arrow button.
You will not be able to exit the Startup Script
until the leveling portion of the script begins.
Disable Steppers/Enable Steppers. This
entry allows you to toggle on and o the
stepper motors that move the extruders and
build platform. If you need to manually move
the build platform or the extruders, you must
first disable the stepper motors.
Blink LEDs/Stop Blinking. This entry allows
you to toggle on and o blinking. When toggled
on, the LEDS in the MakerBot Replicator 2X will
start blinking. When toggled o, the LEDs in the
MakerBot Replicator 2X will stop blinking.
Calibrate Nozzles. This entry launches a
script that allows the MakerBot Replicator 2X
to correctly locate the two extruder nozzles.
Use this script if your dual extrusion prints
don’t appear to line up correctly on the plate.
The script will print a series of lines with each
nozzle and ask you to choose the ones that
line up best. Your MakerBot Replicator 2X will
store that information and use it to make your
dual extrusion prints align better in the future.
Exit Menu. This entry returns you to the
top-level menu.
UTILITIES MENU CONTINUED
33LCD MENUS
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für MakerBot Replicator 2X wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info