534675
47
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
47
DOWNLOADING AND INSTALLING MAKERWARE
TROUBLESHOOTING
1. Go to http://makerbot.com/makerware.
2. Choose your operating system from the
platform drop-down menu. [Fig. 7.1]
3. Click the Download button and save the
.exe or .dmg file to your local computer.
4. Open the saved file and follow the
directions to install the MakerWare soware.
NOTE: During Windows installation, a separate
installer window will open and prompt you to
install device drivers.
Cannot install MakerWare
Perform the installation steps again. If the
installation fails a second time, collect as
much information on the failure as you
can and open a support ticket by emailing
support@makerbot.com. MakerBot Support
will work with you to diagnose the issue.
Computer displays security warnings
during installation
Your operating system may not recognize
the drivers MakerWare is installing because
they are specific to MakerWare and to your
MakerBot Replicator 2X. Click OK to allow
the device drivers to install.
SELECTING YOUR MAKERBOT
REPLICATOR 2X
If you connect your MakerBot Replicator 2X to
your computer before you start MakerWare,
MakerWare will automatically detect your
MakerBot Replicator 2X. The icon in the lower
right corner will display “The Replicator 2X.
If you start MakerWare before you connect
your MakerBot Replicator 2X to your
computer, MakerWare will display a
welcome message and ask you to choose
your bot from a dropdown menu. Choose
Replicator 2X and click Let’s Get Started!
If MakerWare defaults to the incorrect type
of MakerBot 3D printer:
1. Open the MakerBots menu.
2. Choose Type of MakerBot.
3. Choose The Replicator 2X.
MakerWare will display settings and options
appropriate for the MakerBot Replicator 2X
Fig. 7.1
47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für MakerBot Replicator 2X wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info