Bedienungsanleitung Makita 1051D (Seite 5 von 13) (Englisch, Holländisch)

448164

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

ENGLISH

Explanation of general view

1 Button

2 Battery cartridge

3 Knob

4 Scale

5 Pointer

6 Lock-off button

7 Switch trigger

8Start

9End

10 Washer

11 Thumb screw (A)

12 Edge fence (Guide rule)

13 Thumb screw (B)

14 Blade edge

15 Side of drum

16 Cutting line

17 “V” groove

18 Front base

19 Align “V” groove with edge of

workpiece

20 Dust bag

21 Nozzle

22 Fastener

23 Installation bolts

24 Hex wrench

25 Loosen (counterclockwise)

26 Planer blade

27 Drum

28 Drum cover

29 Pan head screws

SPECIFICATIONS

Model 1051D

Capacities

Planing width ..................................................... 50 mm

Planing depth .................................................... 0.5 mm

Shiplapping (rabbeting) depth ........................... 15 mm

No load speed (min

-1

) .............................................9,000

Overall length ..................................................... 297 mm

Net weight ...............................................................2.2 kg

Rated voltage .................................................D.C. 14.4 V

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Intended use

The tool is intended for planing wood.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

IMPORTANT SAFETY INSTRUCTIONS FOR

CHARGER & BATTERY CARTRIDGE

ENC004-1

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using bat-

tery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Always cover the battery terminals with the bat-

tery cover when the battery cartridge is not

used.

6. Do not short the battery cartridge:

(1) Do not touch the terminals with any conduc-

tive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a break-

down.

7. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

8. Do not incinerate the battery cartridge even if it

is severely damaged or is completely worn out.

The battery cartridge can explode in a fire.

9. Be careful not to drop or strike battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the bat-

tery cartridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room tempera-

ture at 10°C – 40°C (50°F – 104°F). Let a hot bat-

tery cartridge cool down before charging it.

4. Charge the Nickel Metal Hydride battery car-

tridge when you do not use it for more than six

months.

ADDITIONAL SAFETY RULES FOR TOOL

ENB043-1

1. Be aware that this tool is always in an operating

condition, because it does not have to be

plugged into an electrical outlet.

2. Rags, cloth, cord, string and the like should

never be left around the work area.

3. Avoid cutting nails. Inspect for and remove all

nails from the workpiece before operation.

4. Use only sharp blades. Handle the blades very

carefully.

5. Be sure the blade installation bolts are securely

tightened before operation.

6. Hold the tool firmly with both hands.

7. Keep hands away from rotating parts.

8. Before using the tool on an actual workpiece, let

it run for a while. Watch for vibration or wobbling

that could indicate poor installation or a poorly

balanced blade.

9. Make sure the blade is not contacting the work-

piece before the switch is turned on.

10. Wait until the blade attains full speed before cut-

ting.

11. Keep at least 200mm away from the tool at all

times.

12. Always switch off and wait for the blades to

come to a complete stop before any adjusting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 1051D Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita 1051D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info