Bedienungsanleitung Makita 1911B (Seite 5 von 40) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

448171

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Switch action

CAUTION:

• Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

“OFF” position when released.

For tool without lock button and lock-off button

(Fig. 2)

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

For tool with lock button (Fig. 3)

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

For tool with lock-off button (Fig. 3)

To prevent the switch trigger from being accidentally

pulled, a lock-off button is provided.

To start the tool, depress the lock-off button and pull the

switch trigger. Release the switch trigger to stop.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Removing or installing planer blades (Fig. 4, 5 & 6)

CAUTION:

• Tighten the blade installation bolts carefully when

attaching the blades to the tool. A loose installation bolt

can be dangerous. Always check to see they are tight-

ened securely.

• Handle the blades very carefully. Use gloves or rags to

protect your fingers or hands when removing or install-

ing the blades.

• Use only the Makita wrench provided to remove or

install the blades. Failure to do so may result in over-

tightening or insufficient tightening of the installation

bolts. This could cause an injury.

To remove the blades on the drum, unscrew the installa-

tion bolts with the socket wrench. The drum cover comes

off together with the blades.

To install the blades, first clean out all chips or foreign

matter adhering to the drum or blades. Use blades of the

same dimensions and weight, or drum oscillation/vibra-

tion will result, causing poor planing action and, eventu-

ally, tool breakdown.

Place the blade on the gauge base so that the blade

edge is perfectly flush with the inside edge of the gauge

plate. Place the adjust plate on the blade, then simply

press in the heel of the adjust plate flush with the back

side of the gauge base and tighten two screws on the

adjust plate. Now slip the heel of the adjust plate into the

drum groove, then fit the drum cover on it. Tighten the

installation bolts evenly and alternately with the socket

wrench.

For the correct planer blade setting

Your planing surface will end up rough and uneven, unless the blade is set properly and securely. The blade must be

mounted so that the cutting edge is absolutely level, that is, parallel to the surface of the rear base.

Refer to some examples below for proper and improper settings.

(A)

(B)

(A)

(B)

(A)

Although this side view cannot show it,

the edges of the blades run perfectly

parallel to the rear base surface.

Cause: One or both blades fails to

have edge parallel to rear

base line.

Cause: One or both blade edges fails

to protrude enough in relation

to rear base line.

Cause: One or both blade edges

protrudes too far in relation to

rear base line.

Correct setting

Nicks in surface

Gouging at start

Gouging at end

(A) Front base (Movable shoe)

(B) Rear base (Stationary shoe)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 1911B Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita 1911B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info