Bedienungsanleitung Makita 2414 (Seite 6 von 16) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

110245

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

ENGLISH

Explanation of general view

1 Safety guide

2 Shaft lock

3 Socket wrench

4 Cut-off wheel

5 Inner flange

6O-ring

7Spindle

8 Ring

9 Outer flange

10 Hex bolt

11 Screw

12 Spark guard

13 Guide plate

14 Hex bolts

15 Vise plate

16 Vise nut

17 Vise handle

18 Spacer block

19 Straight piece of wood (Spacer)

20 Over 190 mm long

21 Over 45 mm wide

22 Over 65 mm wide

23 Diameter of workpiece

24 Spacer block

25 Vise

26 Width of spacer block

27 Blocks

28 Switch trigger

29 Lock-off button

30 Lock button

31 Handle

32 Uncut portion

33 Workpiece

34 Wing bolt

35 Under cover

36 Limit mark

37 Screwdriver

38 Brush holder cap

SPECIFICATIONS

Model 2414B

Wheel diameter ...................................................................................................................................................355 mm

Hole diameter .....................................................................................................................................................25.4 mm

No load speed (min

-1

) ............................................................................................................................................ 3,800

Dimensions (L x W x H)

With under cover .............................................................................................................500 mm x 280 mm x 620 mm

Net weight

For tools with European type safety guide and under cover...............................................................................18.7 kg

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

For public low-voltage distribution systems of

between 220 V and 250 V

Switching operations of electric apparatus cause voltage

fluctuations. The operation of this device under unfavor-

able mains conditions can have adverse effects to the

operation of other equipment. With a mains impedance

equal or less than 0.26 Ohms it can be presumed that

there will be no negative effects.

The mains socket used for this device must be protected

with a fuse or protective circuit breaker having slow trip-

ping characteristics.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

ADDITIONAL SAFETY RULES

ENB066-1

1. Wear protective glasses. Also wear hearing pro-

tection during extended periods of operation.

2. Use only wheels recommended by the manufac-

turer which have a maximum operating speed at

least as high as “No Load RPM” marked on the

tool’s nameplate. Use only fiberglass-reinforced

cut-off wheels.

3. Check the wheel carefully for cracks or damage

before operation. Replace cracked or damaged

wheel immediately.

4. Secure the wheel carefully.

5. Use only flanges specified for this tool.

6. Be careful not to damage the spindle, flanges

(especially the installing surface) or bolt, or the

wheel itself might break.

7. Keep guards in place and in working order.

8. Hold the handle firmly.

9. Keep hands away from rotating parts.

10. Make sure the wheel is not contacting the work-

piece before the switch is turned on.

11. Before using the tool on an actual workpiece, let

it simply run for several minutes first. Watch for

flutter or excessive vibration that might be

caused by poor installation or a poorly balanced

wheel.

12. Watch out for flying sparks when operating.

They can cause injury or ignite combustible

materials.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 2414 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info