Bedienungsanleitung Makita 4014NV (Seite 4 von 6) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

448187

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

ENGLISH

Explanation of general view

1 Nozzle

2 Blower outlet

3 Suction inlet

4 Dust bag

5 Fastener

6 Switch trigger

7 Lock button

8 Speed control screw

9 Lower

10 Higher

11 Limit mark

12 Screwdriver

13 Brush holder cap

SPECIFICATIONS

Model 4014N 4014NV

Capacities

Air pressure (water column) ......................................................560 mm 0 – 560 mm

Air volume ................................................................................2.8 m

/min. 0 – 2.8 m

/min.

No load speed (min

–1

) ................................................................ 16,000 0 – 16,000

Overall length .............................................................................. 430 mm 430 mm

Net weight ................................................................................... 1.75 kg 1.75 kg

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

ADDITIONAL SAFETY RULES

1. Always use protective goggles, a cap and mask

when using the blower.

2. Never point the nozzle at anyone in the vicinity

when using the blower.

3. Always use the dust bag when collecting dust,

chips and the like.

4. Do not collect still smoldering cigarette ashes or

freshly cut metals shavings. Warning – Electric

shock could occur if used on wet surfaces. Do

not expose to rain. Store indoors.

5. Never block suction inlet and/or blower outlet.

Increased motor revolution may cause danger-

ous fan breakage.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Blowing (Fig. 1)

For dust blowing, attach nozzle to blower outlet, turning

clockwise to lock it in place.

Dust suction (Fig. 2 & 3)

Note:

Dust bags are optional accessories in some countries.

For dust suction, fit nozzle onto suction inlet and dust

bag onto blower outlet.

After the bag fills with dust, empty the contents of the

dust bag into a dust bin by releasing the fastener.

Switch action

CAUTION:

Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the “OFF”

position when released.

For 4014N (Fig. 4)

To start the tool, simply pull the trigger. Release the trig-

ger to stop. For continuous operation, pull the trigger and

then push in the lock button. To stop the tool from the

locked position, pull the trigger fully, then release it.

For 4014NV (Fig. 5)

To start the tool, simply pull the trigger. Tool speed is

increased by increasing pressure on the trigger. Release

the trigger to stop. For continuous operation, pull the trig-

ger and then push in the lock button. To stop the tool from

the locked position, pull the trigger fully, then release it.

A speed control screw is provided so that maximum tool

speed can be limited (variable). Turn the speed control

screw clockwise for higher speed, and counterclockwise

for lower speed.

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Replacement of carbon brushes (Fig. 6 & 7)

Replace carbon brushes when they are worn down to the

limit mark. Both identical carbon brushes should be

replaced at the same time.

To maintain product safety and reliability, repairs, mainte-

nance or adjustment should be carried out by a Makita

Authorized Service Center.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 4014NV Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info