Bedienungsanleitung Makita 4093D (Seite 4 von 36) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

690946

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

Explanation of general view

1 Rear cover

2 Battery cartridge

3 Switch

4 Nozzle

5 Cleaner body

6 Extension wand (Straight pipe)

7 Corner nozzle

8 Front cover

9 Depress

0 Open

q Dust bag

w Hook front cover onto front lip

e Close

r Front lip

SPECIFICATIONS

Model 4093D

Capacity ......................................................... 500 ml

Continuous use

(with battery 9000) ................ High: Approx. 13 min.

Low: Approx. 23 min.

Overall length ............................................... 484 mm

Net weight ....................................................... 1.3 kg

Rated voltage ........................................... D.C. 9.6 V

•

Due to our continuing program of research and

development, the specifications herein are subject

to change without notice.

•

Note: Specifications may differ from country to

country.

Safety hints

For your own safety, please refer to the enclosed

safety instructions.

ADDITIONAL SAFETY RULES

1. Read this instruction manual and the charger

instruction manual carafully before use.

2. Do not pick up wet materials, lit cigarettes or

the like.

3. Stop operation immediately if you notice any-

thing abnormal.

4. If you drop or strike the cleaner, check it

carefully for cracks or damage before opera-

tion.

5. Do not bring close to stoves or other heat

sources.

6. Do not block the intake hole or vent holes.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Installing or removing battery cartridge

(Fig.1&2)

•

Always switch off the cleaner before insertion or

removal of the battery cartridge.

•

To remove the battery cartridge, remove the rear

cover from the cleaner by pushing it in the direction

of the arrow and then withdraw the battery cartridge

from the cleaner.

•

To insert the battery cartridge, align the tongue on

the battery cartridge with the groove in the cleaner

and slip it into place. Then close the rear cover.

•

Do not use force when inserting the battery car-

tridge. If the cartridge does not slide in easily, it is

not being inserted correctly.

Charging

Charge the battery cartridge with your Makita charger

properly before use.

Following batteries can be used for this cleaner;

Battery type

Capacity

(mAh)

Number of

cells

9000 1,200 8

9002 2,000 8

9033 2,200 8

Switch action (Fig. 3)

CAUTION:

•

Always be sure that the dust bag or paper pack is

installed properly in the cleaner before use.

Improper installation may allow dust to enter the

motor, resulting in malfunction of the cleaner.

•

Always switch off the cleaner after each use to

prevent damage to the cleaner and to lengthen the

service life of the batteries.

This cleaner can be operated in ‘‘standard’’ and

‘‘strong’’ suction. For standard suction, slide the

switch forward to the LOW position. For strong suc-

tion, slide the switch further to the HIGH position.

To stop the cleaner, slide the switch back to the OFF

position.

4093D (E) (’99. 12. 1)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 4093D Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info