Bedienungsanleitung Makita 4105 KB (Seite 4 von 12) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

448193

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

ENGLISH

Explanation of general view

1 Blade cover

2 Wrench

3 Diamond wheel

4 Outer flange

5 Socket wrench

6 Tighten

7 Loosen

8 Inner flange

9 Hex bolt

0 Wing nut

q Base

w Dust spout

e Switch trigger

r Restart button

t Limit mark

y Brush holder cap

u Screwdriver

SPECIFICATIONS

Model 4105KB

Blade diameter ............................................. 125 mm

Max. cutting capacity ..................................... 40 mm

No load speed (RPM) ...................................... 7,500

Overall length ............................................... 230 mm

Net weight ....................................................... 3.2 kg

•

Due to the continuing program of research and

development, the specifications herein are subject

to change without prior notice.

•

Note: Specifications may differ from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

1. Check the wheel carefully for cracks or dam-

age before operation. Replace cracked or

damaged wheel immediately.

2. Use only flanges specified for this machine.

3. Be careful not to damage the spindle, flanges

(especially the installing surface) or bolt. Dam-

age to these parts could result in wheel break-

age.

4. Hold the machine firmly.

5. Keep hands away from rotating parts.

6. Make sure the wheel is not contacting the

workpiece before the switch is turned on.

7. Wait until the wheel attains full speed before

cutting.

8. Stop operation immediately if you notice any-

thing abnormal.

9. Do not attempt to lock the trigger in the ‘‘ON’’

position.

10. Never attempt to cut with the machine held

upside down in a vise. This can lead to serious

accidents, because it is extremely dangerous.

(Fig. 1)

11. Before setting the machine down after com-

pleting a cut, be sure that the wheel has come

to a complete stop.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Removing or installing diamond wheel

(Fig. 2,3&4)

Important:

Always be sure that the machine is switched off and

unplugged before removing or installing the wheel.

Remove the blade cover.

Hold the outer flange with the wrench and loosen the

hex bolt clockwise with the socket wrench. Then

remove the hex bolt, outer flange and wheel.

To install the wheel, follow the removal procedure in

reverse.

BE SURE TO TIGHTEN THE HEX BOLT SECURELY.

CAUTION:

Use only the Makita wrench and socket wrench to

install or remove the wheel.

Adjusting depth of cut (Fig. 5)

Loosen the wing nut on the depth guide and move the

base up or down. At the desired depth of cut, secure

the base by tightening the wing nut.

CAUTION:

After adjusting the depth of cut, always tighten the

wing nut securely.

Dust bag (Fig. 6)

The use of the dust bag makes cutting operations

clean and dust collection easy. To attach the dust bag,

fit it onto the dust spout. When the dust bag is about

one-third full, remove the dust bag from the machine

and pull the fastener out. Empty the dust bag of its

contents, tapping it lightly so as to remove particles

adhering to the insides which might hamper collec-

tion.

Sighting (Fig. 7)

Align the notch in the front of the base with your

cutting line on the workpiece.

4105KB (E) (’97. 5. 30)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 4105 KB Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info