Bedienungsanleitung Makita 4190 D (Seite 4 von 9) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

448197

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

ENGLISH

Explanation of general view

1 Set plate

2 Battery cartridge

3 Tank holder installing portion

4 Tank

5Screw (A)

6Screw (B)

7 Tank holder

8 Diamond wheel

9Bolt

10 Flange

11 Blade stopper pin

12 Tighten

13 Loosen

14 Hex wrench

15 Depth guide

16 Bolt (A)

17 Bevel scale plate

18 Bolt (B)

19 Blade case

20 Base

21 For straight cuts

22 For 45° bevel cuts

23 Lock-off lever

24 Switch trigger

25 Cap

SPECIFICATIONS

Model 4190D 4190DB

Wheel diameter ........................................................................... 80 mm 80 mm

Cutting depth

90° ............................................................................................ 0–18 mm 0 –18 mm

45° ............................................................................................ 0–16 mm 0 – 16 mm

No load speed (min

-1

) ................................................................. 1,000 1,000

Overall length .............................................................................. 313 mm 313 mm

Net weight ................................................................................... 1.9 kg 1.9 kg

Rated voltage .............................................................................. D.C. 9.6 V D.C.9.6V

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Intended use

The tool is intended for cutting in glass and masonry

materials with a diamond wheel and water.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

IMPORTANT SAFETY INSTRUCTIONS

FOR CHARGER & BATTERY CARTRIDGE

ENC004-1

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using bat-

tery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Always cover the battery terminals with the bat-

tery cover when the battery cartridge is not

used.

6. Do not short the battery cartridge:

(1) Do not touch the terminals with any conduc-

tive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a break-

down.

7. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

8. Do not incinerate the battery cartridge even if it

is severely damaged or is completely worn out.

The battery cartridge can explode in a fire.

9. Be careful not to drop or strike battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the bat-

tery cartridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room tempera-

ture at 10°C – 40°C (50°F – 104°F). Let a hot bat-

tery cartridge cool down before charging it.

4. Charge the Nickel Metal Hydride battery car-

tridge when you do not use it for more than six

months.

ADDITIONAL SAFETY RULES FOR TOOL

1. Be aware that this is always in an operating con-

dition, because it does not have to be plugged

into an electrical outlet.

2. Check the wheel carefully for cracks or damage

before operation. Replace cracked or damaged

wheel immediately.

3. Use only flanges specified for this tool.

4. Be careful not to damage the spindle, flanges

(especially the installing surface) or bolt. Dam-

age to these parts could result in wheel break-

age.

5. Hold the tool firmly.

6. Keep hands away from rotating parts.

7. Make sure the wheel is not contacting the work-

piece before the switch is turned on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 4190 D Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info