Bedienungsanleitung Makita 4323 (Seite 6 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

690954

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH

Explanation of general view

1 Bolt

2 Hex wrench

3 Loosen

4 Blade holder

5 Jig saw blade

6 Roller

7 Retainer

8 Bolt

9 Base

0 Hook

q Dust cover

w Switch trigger

e Lock button

r Speed adjusting dial

t Cutting line

y Graduations

u Edge of motor housing

i Starting hole

o Hose

p Rip fence

a Bolt

s Fence guide

d Threaded knob

f Circular guide pin

g Protrusions

h Anti-splintering device

SPECIFICATIONS

Model 4322 4323

Length of stroke ............................................................... 18 mm 18 mm

Strokes per minute ........................................................... 3,100 500 – 3,100

Cutting capacities

Wood ............................................................................. 65 mm 65 mm

Mild steel ....................................................................... 6 mm 6 mm

Overall length ................................................................... 207 mm 207 mm

Net weight ........................................................................ 1.8 kg 1.8 kg

•

Due to the continuing program of research and

development, the specifications herein are subject

to change without prior notice.

•

Note: Specifications may differ from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

ADDITIONAL SAFETY RULES

1. Avoid cutting nails. Inspect for and remove all

nails from the workpiece before operation.

2. Do not cut hollow pipe.

3. Do not cut oversize workpiece.

4. Check for the proper clearance beneath the

workpiece before cutting so that the blade will

not strike the floor, workbench, etc.

5. Hold the machine firmly.

6. Make sure the blade is not contacting the

workpiece before the switch is turned on.

7. Keep hands away from moving parts.

8. When cutting through walls, floors or wher-

ever ‘‘live’’ electrical wires may be encoun-

tered, DO NOT TOUCH ANY METAL PARTS OF

THE MACHINE! Hold the machine only by the

insulated grasping surfaces to prevent electric

shock if you cut through a ‘‘live’’ wire.

9. Do not leave the machine running. Operate the

machine only when hand-held.

10. Always switch off and wait for the blade to

come to a complete stop before removing the

blade from the workpiece.

11. Do not touch the blade or the workpiece imme-

diately after operation; they may be extremely

hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Installing or removing saw blade (Fig.1&2)

CAUTION:

•

Always be sure that the machine is switched off and

unplugged before installing or removing the blade.

•

Always clean out all chips or foreign matter adher-

ing to the blade and/or blade holder. Failure to do so

may cause insufficient tightening of the blade,

resulting in a serious injury.

To install the blade, loosen the bolt on the blade

holder with the hex wrench. With the blade teeth

facing forward, insert the blade into the blade holder

as far as it will go. Make sure that the back edge of the

blade fits into the roller. Then tighten the bolt to secure

the blade.

To remove the blade, follow the installation proce-

dures in reverse.

Adjusting roller (Fig. 3)

Loosen the bolt on the back of the machine base with

the hex wrench. Move the retainer so that the roller

contacts the blade lightly. Then tighten the bolt to

secure the machine base and the retainer.

NOTE:

Occasionally lubricate the roller.

Hex wrench storage (Fig. 4)

When not in use, the hex wrench can be conveniently

stored as shown in Fig. 4.

4322/4323 (E) (’98. 5. 6)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 4323 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info