Bedienungsanleitung Makita 4329 (Seite 6 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Norwegisch)

110171

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH (Original instructions)

Explanation of general view

1 Cutting action changing lever

2 Switch trigger

3Lock button

4 Speed adjusting dial

5 Blade holder

6Bolt

7Hex wrench

8 Blade

9Roller

10 Hook

11 Retainer

12 Base

13 Dust cover

14 Cutting line

15 Edge

16 Graduation

17 Starting hole

18 Hose

19 Steel base type

20 Rip fence (Guide rule)

21 Aluminum base type

22 Guide facing

23 Fence guide

24 Threaded knob

25 Pin

26 Anti-splintering device

27 Protrusions

28 Aluminum base

29 Cover plate

SPECIFICATION

• Due to our continuing programme of research and

development, the specifications herein are subject to

change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

Intended use

The tool is intended for the sawing of wood, plastic and

metal materials. As a result of the extensive accessory

and saw blade program, the tool can be used for many

purposes and is very well suited for curved or circular

cuts.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply.

They are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

GEB016-2

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adher-

ence to jig saw safety rules. If you use this tool

unsafely or incorrectly, you can suffer serious

personal injury.

1. Hold power tool by insulated gripping sur-

faces when performing an operation where

the cutting tool may contact hidden wiring or

its own cord. Cutting accessory contacting a “live”

wire may make exposed metal parts of the power

tool “live” and could give the operator an electric

shock.

2. Use clamps or another practical way to

secure and support the workpiece to a stable

platform. Holding the work by hand or against your

body leaves it unstable and may lead to loss of con-

trol.

3. Always use safety glasses or goggles. Ordi-

nary eye or sun glasses are NOT safety

glasses.

4. Avoid cutting nails. Inspect workpiece for any

nails and remove them before operation.

5. Do not cut oversize workpiece.

Model 4326 4327 4328 4329

Length of stroke 18 mm 18 mm 18 mm 18 mm

Blade type B type

Max. cutting

capacities

Wood 65 mm 65 mm 65 mm 65 mm

Mild steel 6 mm 6 mm 6 mm 6 mm

Strokes per minute (min

–1

) 3,100 500 – 3,100 500 – 3,100 500 – 3,100

Overall length

217 mm

(Steel base type)

217 mm

(Steel base type)

217 mm 223 mm

223 mm

(Aluminum base type)

223 mm

(Aluminum base type)

Net weight

1.8 kg

(Steel base type)

1.8 kg

(Steel base type)

1.8 kg 1.9 kg

1.9 kg

(Aluminum base type)

1.9 kg

(Aluminum base type)

Safety class /II

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 4329 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info