Bedienungsanleitung Makita 6823k (Seite 4 von 7) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

381156

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

ENGLISH

Explanation of general view

1 Locking sleeve

2 Approximately 1 mm

3 Locator

4Bit

5 Magnetic bit holder

6 Switch trigger

7 Lock button

8 Reversing switch lever

9Hook

SPECIFICATIONS

Model 6823 6824 6825 / 6825R

Capacities

Self drilling screw .....................................................................6mm 6 mm —

Drywall screw ...........................................................................6mm 5 mm 4 mm

No load speed (min

–1

) .................................................................0 – 2,500 0 – 4,500 0 – 6,000

Overall length ..............................................................................301 mm 290 mm 290 mm

Net weight ...................................................................................1.5kg 1.4 kg 1.4 kg

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Intended use

The tool is intended for screw driving in wood, metal and

plastic.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

ADDITIONAL SAFETY RULES

1. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

2. Hold the tool firmly.

3. Keep hands away from rotating parts.

4. When driving into walls, floors or wherever

“live” electrical wires may be encountered, DO

NOT TOUCH ANY METAL PARTS OF THE TOOL!

Hold the tool only by the insulated grasping sur-

faces to prevent electric shock if you drive into a

“live” wire.

5. Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely hot

and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Depth adjustment

The depth can be adjusted by turning the locking sleeve.

Turn it in “A” direction for less depth and in “B” direction

for more depth. One full turn of the locking sleeve equals

1.5 mm change in depth. (Fig. 1) Adjust the locking

sleeve so that the distance between the tip of the locator

and the screw head is approximately 1 mm as shown in

Fig. 2 or 3. Drive a trial screw into your material or a

piece of duplicate material. If the depth is still not suitable

for the screw, continue adjusting until you obtain the

proper depth setting. (Fig. 2 & 3)

Removing or installing bit (Fig. 4 & 5)

Important:

Always be sure that the tool is switched off and

unplugged before removing or installing the bit.

To remove the bit, first pull the locator out of the locking

sleeve. Then grasp the bit with a pair of pliers and pull the

bit out of the magnetic bit holder. Sometimes, it helps to

wiggle the bit with the pliers as you pull.

To install the bit, push it firmly into the magnetic bit

holder. Then install the locator by pushing it firmly back

onto the locking sleeve.

Switch action (Fig.6)

CAUTION:

Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the “OFF”

position when released.

To start the tool, simply pull the switch trigger. Tool speed

is increased by increasing pressure on the switch trigger.

Release the switch trigger to stop. For continuous opera-

tion, pull the switch trigger and then push in the lock but-

ton. To stop the tool from the locked position, pull the

switch trigger fully, then release it.

NOTE:

Even with the switch on and motor running, the bit will not

rotate until you fit the point of the bit in the screw head

and apply forward pressure to engage the clutch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 6823k Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info