Bedienungsanleitung Makita 6905b (Seite 4 von 7) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

381157

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

ENGLISH

Explanation of general view

1 Socket

2 Anvil

3 Counterclockwise

4 Reversible switch

5 Clockwise

6 Limit mark

7 Screwdriver

8 Brush holder cap

SPECIFICATIONS

Model 6905B 6906

Capacities

Bolt size ....................................................................................12 mm – 20 mm 16 mm – 22 mm

Square drive .............................................................................12.7 mm 19 mm

Impacts per minute ......................................................................2,000 1,600

No load speed (min

–1

) .................................................................1,700 1,700

Tightening torque ........................................................................3,000 kg•cm 6,000 kg•cm

Overall length ..............................................................................270mm 327 mm

Net weight ...................................................................................2.7 kg 5.0 kg

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

ADDITIONAL SAFETY RULES

FOR TOOL

1. Wear ear protectors.

2. Check the socket carefully for wear, cracks or

damage before installation.

3. Hold the tool firmly.

4. Always be sure you have a firm footing. Be sure

no one is below when using the tool in high loca-

tions.

5. The proper tightening torque may differ depend-

ing upon the kind or size of the bolt. Check the

torque with a torque wrench.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Holding the tool

Hold the tool firmly with one hand on the gripping part of

the tool and the other hand on the side grip when per-

forming the tool.

Selecting correct socket

Use a correct size socket for bolts and nuts. A wrong size

socket will result in inaccurate and inconsistent tightening

torque.

Installing the side grip (Fig.1)

For 6906 only

Fit the side grip into the groove on the middle of the ham-

mer case and fasten securely.

Attaching the socket (Fig. 2)

Selecting a proper socket in size, please insert it into the

anvil so as to fix securely.

Switch action (Fig. 3)

CAUTION:

• Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

“OFF” position when released.

• Change the direction of rotation only after the tool

comes to a complete stop. Changing it before the tool

stops may damage the tool.

The switch is reversible, providing either clockwise or

counterclockwise rotation. To start the tool, simply pull

the lower part of the switch for clockwise, the upper part

for counterclockwise. Release the switch to stop.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 6905b Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita 6905b

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info