Bedienungsanleitung Makita 6905b (Seite 3 von 36) (Deutsch)

381157

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

Explanation of general view

1 Socket

2 Anvil

3 Counterclockwise

4 Reversible switch

5 Clockwise

6 Limit mark

7 Screwdriver

8 Brush holder cap

SPECIFICATIONS

Model 6905B 6906

Capacities

Bolt size ................................................................... 12 mm – 20 mm 16 mm – 22 mm

Square drive ............................................................ 12.7 mm 19 mm

Impacts per minute ..................................................... 2,000 1,600

No load speed (RPM) ................................................. 1,700 1,700

Tightening torque ........................................................ 3,000 kg

cm 6,000 kg

Overall length ............................................................. 270 mm 327 mm

Net weight ................................................................... 2.7 kg 5.0 kg

•

Due to the continuing program of research and

development, the specifications herein are subject

to change without prior notice.

•

Note: Specifications may differ from country to

country.

Power supply

The machine should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

These symbols mean:

Read instruction manual.

DOUBLE INSULATION

ADDITIONAL SAFETY RULES

FOR MACHINE

1. Wear ear protectors.

2. Check the socket carefully for wear, cracks or

damage before installation.

3. Hold the machine firmly.

4. Always be sure you have a firm footing. Be

sure no one is below when using the machine

in high locations.

5. The proper tightening torque may differ

depending upon the kind or size of the bolt.

Check the torque with a torque wrench.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Selecting correct socket

Use a correct size socket for bolts and nuts. A wrong

size socket will result in inaccurate and inconsistent

tightening torque.

Installing the side grip (Fig. 1)

For 6906 only

Fit the side grip into the groove on the middle of the

hammer case and fasten securely.

Attaching the socket (Fig. 2)

Selecting a proper socket in size, please insert it into

the anvil so as to fix securely.

Switch action (Fig. 3)

CAUTION:

•

Before plugging in the machine, always check to

see that the switch trigger actuates properly and

returns to the ‘‘OFF’’ position when released.

•

Change the direction of rotation only after the

machine comes to a complete stop. Changing it

before the machine stops may damage the

machine.

The switch is reversible, providing either clockwise or

counterclockwise rotation. To start the machine, sim-

ply pull the lower part of the switch for clockwise, the

upper part for counterclockwise. Release the switch

to stop.

6905B (E) (’96. 5. 17)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita 6905b Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita 6905b

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info