Bedienungsanleitung Makita AC310H (Seite 8 von 240) (Alle Sprachen)

598386

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

MAINTENANCE

To ensure efficient operation and longer life of the air

compressor unit, a routine maintenance schedule should

be prepared and followed. The following routine

maintenance schedule is geared to a unit in a normal

working environment operating on a daily basis. If

necessary, the schedule should be modified to suit the

conditions under which your compressor is used. The

modifications will depend upon the hours of operation and

the working environment. Compressor units in an

extremely dirty and/or hostile environment will require a

greater frequency of all maintenance checks.

ROUTINE MAINTENANCE SCHEDULE

1. Drain water from the air tank, any moisture separators

or air filter regulators.

2. Check for any unusual noise and/or vibration.

3. Manually check all safety valves to make sure they are

operating properly.

WARNING: Risk of bursting.

Check Safety Valve. If safety valve does not operate

properly over pressurization of the air tank may result

in rupture or explosion causing personal injury and

property damage.

4. Inspect air filter, replace if necessary.

5. Inspect air lines and fittings for leaks; correct as

necessary.

Each year of operation or if a problem is suspected:

• Check condition of air compressor pump intake and

exhaust valves.

• Check condition of check valve. Replace if

damaged or worn out.

6. Keep all screws, bolts, and covers properly tightened.

Check their conditions periodically.

WARNING:

Keep All Screws, Bolts and Covers Properly

Tightened. If screws, plates or covers become loose

personal injury or property damage may occur.

1) TROUBLE SHOOTING

2) WARNING!

Wrong way to transport and lift will lead machine damaged.

Daily maintenance

1. Before each use:

A Be sure all nuts and bolts are tight.

B Check for unusual noise or vibration.

2. After each use:

Exhaust all the air in the air storage tank. Open the

drain cock at the bottom of the air storage tank to drain

condensation from tank.

3. Weekly maintenance:

A Check performance of safety valve.

B Check the air switch the designed rated pressure

is 2.8 Mpa.

C Clean the air filter.

4. Monthly maintenance:

A Inspect air system for leaks by applying soapy

water to all joints. Tighten those joints if leakage is

observed.

B Check that all nuts and bolts stay tight.

C Replace the air filter with a new one.

D Clean surface of air compressor.

5. Quarterly maintenance:

A Check the cylinder and piston see to if wore.

WARNING:

Never use the air compressor which is operating

abnormally.

If the air compressor appears to be operating

unusually, making strange noises or vibration,

stop using it immediately and arrange for repairs

by a Makita authorized service center.

WARNING:

Use only genuine Makita replacement parts.

Replacement parts not manufactured by Makita

may void your warranty and can lead to

malfunction and result in injuries. Genuine Makita

parts are available from an authorized dealer.

WARNING:

UNIT CYCLES AUTOMATICALLY WHEN

POWER IS ON. WHEN DOING MAINTENANCE,

YOU MAY BE EXPOSED TO VOLTAGE SOURCES,

COMPRESSED AIR OR MOVING PARTS.

PERSONAL INJURIES CAN OCCUR. BEFORE

PERFORMING ANY MAINTENANCE OR REPAIR,

UNPLUG THE COMPRESSOR AND BLEED OFF

ALL AIR PRESSURE.

PROBLEM CAUSE CORRECTION

Will not start Fuse blown or circuit breaker tripped;

Loose electrical connections;

Extension cord not correct;

Overheated motor

Check for cause and replace or reset; Check

wiring connections Max.15m/50ft., min.

14ga; Use reset button/wait for automatic

reset

Low pressure Air leak in safety valve

Restricted air filter

Defective check valve

Check valve manually: pull up ward on rings.

If condition persists, replace valve; Clean or

replace air filter; Replace check valve.

Safety valve releasing Defective pressure switch or improper

adjustment

Check for proper adjustment and if problem

persists, replace pressure switch

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita AC310H Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info