Bedienungsanleitung Makita AC320H (Seite 10 von 21) (Englisch, Holländisch)

598387

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

explosion causing personal injury and property

damage.

4. Inspect air lines and fittings for leaks; correct as

necessary.

Each year of operation or if a problem is suspected:

• Check condition of air compressor pump intake and

exhaust valves.

• Check condition of check valve. Replace if

damaged or worn out.

5. Keep all screws, bolts, and covers properly tightened.

Check their conditions periodically.

WARNING:

Keep All Screws, Bolts and Covers Properly

Tightened. If screws, plates or covers become loose

personal injury or property damage may occur.

1) TROUBLE SHOOTING

Arrange for Make sure causes and repair for the

solution of malfunction by MAKITA authorized dealer.

2) WARNING!

Wrong way to transport and lift will lead machine

damaged.

Daily maintenance

1. Before each use

A. Be sure all nuts and bolts are tight.

B. Check for unusual noise or vibration.

2. After each use

Exhaust all the air in the air storage tank. Open the

drain cock at the bottom of the air storage tank to drain

condensation from tank.

3. Weekly maintenance

Check the air switch the designed rated pressure is

3.5 MPa.

4. Monthly maintenance

A. Check that all nuts and bolts stay tight.

B. Clean surface of air compressor.

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine: Air Compressor

Model No./ Type: AC320H

Specifications: see “SPECIFICATIONS” table.

are of series production and

Conforms to the following European Directives:

2000/14/EC, 2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN1012-1, EN60204-1

The technical documentation is kept by our authorised

representative in Europe who is:

Makita International Europe Ltd.,

Michigan, Drive, Tongwell,

Milton Keynes, Bucks MK15 8JD, England

The conformity assessment procedure required by

Directive 2000/14/EC was in Accordance with annex VI.

Notified Body:

Société Nationale de Certification et

d’Homologation s.à.r.l. (SNCH),

2a. Kalchesbruck, L-1852 LUXEMBOURG

identification no. 0499

Measured Sound Power Level: 85.22 dB (A)

Guaranteed Sound Power Level: 86 dB (A)

31. 3. 2010

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN

PROBLEM CAUSE CORRECTION

Will not start Fuse blown or circuit breaker tripped

Loose electrical connections;

Extension cord not correct

Overheated mot

Check for cause and replace or reset.

Check wiring connections.

See the section of “Extension cords”

and make sure the extension cord is in

good condition.

Turn the switch ON after the motor is

cooled down.

Mode LED blue and red lighting on and

off at the same time, and will not start.

It is not unusual that mode LED blue

and red lighting on and off when turn

on the switch immediately.

Motor driver perceives an unusual

problems of motor, motor driver and

main part of compressor or pressure

censor. (over heat, overload)

Replace motor, motor driver and

overloaded part of the compressor or

pressure censor.

Low pressure Air leak in relief valve

Restricted air filter

Defective check valve

Air leak in joints and pipes

Defacement in rings

Replace relief valve.

Clean or replace air filter.

Replace check valve.

Tighten joints and pipes.

Replace rings.

Relief valve releasing Defective pressure censor or improper

adjustment

Check for proper adjustment and if

problem persists, replace pressure

switch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita AC320H Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita AC320H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info