Bedienungsanleitung Makita AN634H (Seite 10 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

657977

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

10 ENGLISH

Selecting air hose

CAUTION: Low air output of the compressor,

or a long or smaller diameter air hose in relation

to the nailing frequency may cause a decrease in

the driving capability of the tool.

►Fig.3

Use a high pressure resistant air hose.

Use an air hose as large and as short as possible to

assurecontinuous,efcientnailingoperation.

Lubrication

►Fig.4: 1. Pneumatic tool oil

Oil the tool with pneumatic tool oil by placing two or

threedropsintotheairtting.Thisshouldbedone

beforeandafteruse.

Forproperlubrication,thetoolmustberedacoupleof

timesafterpneumatictooloilisintroduced.

FUNCTIONAL

DESCRIPTION

CAUTION: Before adjusting or checking func-

tion on the tool, always lock the trigger by turning

the trigger lock lever to the lock position , and

disconnect the air hose from the tool.

Adjusting depth of nailing

Thistollhastheadjusterofthenailingdepth.Tomodulate

thenailingdepth,turntheadjustertotheproperdepth.

►Fig.5: 1.Adjuster

Theadjustablerangeis8.0mm(5/16").(Onefullturn

allows1.6mm(1/16")adjustment.)

►Fig.6: 1.Toodeep2. Flush 3.Tooshallow

Hook

CAUTION: Always disconnect the hose when

hanging the tool using the hook.

CAUTION: Never hook the tool at high loca-

tion or on potentially unstable surface.

CAUTION: Do not hang the hook from the

waist belt.Ifthenaileraccidentallydrops,itmay

resultinmisringandpersonalinjuries.

Thehookisusefulforhangingupthetooltemporarily.

Thehookcanbeturnedwhilepushingthebottomtothe

desired angle.

►Fig.7: 1. Hook

Furthermore,thishookcanbeinstalledoneitherside

ofthetool.

Tochangetheinstallationposition,unscrewthebolt

with a screwdriver and remove the nut. Install the hook

onanothersideandthensecureitrmlywiththebolt

and the nut.

►Fig.8: 1. Hook 2. Bolt 3. Nut

Nose adapter

Topreventthesurfaceofworkpiecefrombeing

scratchedordamaged,usethenoseadapter.

Todetachthenoseadapterfromitshousingbase,pull

thenoseadapterwithyourthumbinthedirectionofthe

arrow.

►Fig.9: 1. Nose adapter

Toattachthenoseadaptertothecontactelement,

press it onto the contact element until the recessed

partsinthreeplacesinsidethenoseadaptertinthree

protrusionsofthecontactelement.

►Fig.10: 1. Nose adapter 2.Contactelement

3. Protrusion 4. Recessed part

Air duster

For Model AN635H

CAUTION: Do not aim the ejection port of the

air duster to someone. Also, keep your hands and

foot away from the ejection port.Iftheairduster

buttonisaccidentallypushed,itmaycauseaper-

sonalinjury.

CAUTION: Always check your surroundings

before using the air duster.Blowndustorobjects

may hit someone.

CAUTION: Do not connect or disconnect the

air hose while pushing the air duster button.

Theairsuppliedtothetoolcanalsobeusedasanair

duster. You can clean the work area by pressing the

button on the grip end.

►Fig.11: 1. Button

NOTICE:Afterusingtheairduster,thedrivingforce

ofthetoolwilltemporarilydecline.Waituntiltheair

pressure recovers in this case.

NOTICE:Performatestblowifyouusetheair

dusterimmediatelyaftertheoilwasapplied.Theoil

may be sprayed with the air.

ASSEMBLY

CAUTION: Before carrying out any work on

the tool, always lock the trigger by turning the

trigger lock lever to the lock position

, and

disconnect the air hose from the tool.

Loading nailer

CAUTION: Do not use deformed nails or

linked sheet.

1. Disconnect the air hose.

2. Depress the latch lever and open the door and

magazinecap.

►Fig.12: 1. Latch lever 2. Door 3.Magazinecap

►Fig.13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita AN634H Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info