601098
13
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
Unloading nailer
CAUTION
:
Always disconnect the air hose before unloading the nailer.
Pull
the pusher lever
to
the rear. Return the pusher lever
back while keeping the pusher depressed to disengage it
from the strip of nails.
I
I
Depress the nail stopper and remove the strip of nails from
the magazine.
Adjusting depth
of
nailing
CAUTION:
Pusher
lever
Nail
stopper
Always lock the trigger and disconnect the hose before adjusting the depth of nailing.
To
adjust the depth of nailing, turn the adjuster
so
that the
arrow above the adjuster will point to the number indicated
on the adjuster. The depth of nailing is the deepest when
the arrow points to the number
1.
It
will become shallower
as the arrow points to higher number. The depth can be
changed in approx.
1.0 mm
(1132”)
increments per gradua-
tion. If nails cannot be driven deep enough even when the
arrow points to the number
1,
increase the air pressure.
If
nails are driven
too
deep even when the arrow points to the
number
9,
decrease the air pressure. Generally speaking,
the tool service life will be longer when the tool is used with
lower air pressure and the adjuster set to a lower number.
Connecting air hose
Lock the trigger. Slip the air socket of the air hose onto the
air fitting on the nailer. Be sure that the air socket locks firmly
into position when installed onto the air fitting. A hose
coupling must be installed on
or
near the tool in such a way
that the pressure reservoir will discharge at the time the air
supply coupling is disconnected.
Air socket
\
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Makita AN922 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info