Bedienungsanleitung Makita B7660WH (Seite 12 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690564

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Blower Operation

1. While operating the blower, adjust the throttle trigger / throttle

lever so that the wind force is appropriate for the work location and

conditions.

2. Adjusting engine speed.

For tube throttle model: Engine speed increases by pulling the

throttle trigger. To decrease the engine speed, loosen the throttle

trigger.

The cruise control function allows the operator to maintain a constant

engine speed without pulling the trigger lever. To increase the engine

speed, turn the stop control lever to high speed. To decrease the

engine speed, turn the stop control lever to low speed.

► 1. Throttle trigger 2. Stop control lever

For hip throttle model: To increase the engine speed, turn the throt-

tle lever to high speed. To decrease the engine speed, turn the throt-

tle lever to low speed.

► 1. Throttle lever

Transporting the blower

CAUTION: When transporting the blower, be sure to stop

the engine.

NOTICE: Do not sit or stand on the blower or put a heavy

object on it. It may damage the machine.

NOTICE: Maintain the blower in an upright position whenever

transporting or storing. Transporting or storing in a position that

is not upright may cause oil to spill inside the blower engine. This

may result in oil leaks and white smoke from burning oil, and the air

cleaner may become dirty with oil.

NOTICE: Do not drag the blower when transporting. Otherwise

the blower housing may be damaged.

MAINTENANCE

CAUTION: Before inspection and maintenance, stop the

engine and allow it to cool down. Remove the spark plug and

plug cap. Otherwise the operator may suffer burn or serious injury

due to an accidental start-up.

CAUTION: After inspection and maintenance, make sure

that all parts are assembled.

Replacing engine oil

CAUTION: The engine main unit and engine oil still remain

hot just after the engine is stopped. When replacing engine oil,

make sure that the engine main unit and engine oil are suf-

ciently cooled down. Otherwise, there may remain a risk of scald.

Allow sufcient time after stopping engine for the engine oil to return

to the oil tank to ensure accurate reading of the oil level indicator.

CAUTION: If the oil lled above the limit, it may become

dirty or may catch re with white smoke.

NOTICE: Never discard replaced engine oil in garbage,

ground or sewage. Disposal of oil is regulated by law. In disposal,

always follow the relevant laws and regulations. For any points

remaining unknown, contact Authorized Service Agent.

NOTICE: Oil will deteriorate even when it is kept unused.

Perform inspection and replacement at regular intervals (replace

with new oil every 6 months).

Deteriorated engine oil shortens the life of the sliding and rotating

parts to a great extent. Be sure to check the period and quantity of

replacement.

Interval of replacement

After rst 20 operating hours, followed by every 50 operating hours

Recommended oil

• Makita genuine 4-stroke engine oil or

• API grade SF class or higher, SAE 10W-30 oil (automobile

4-stroke engine oil)

Oil replacement procedure

Change the oil as follows:

► 1. Drainage hole 2. Oil drain bolt 3. Gasket (aluminum washer)

4. Oil cap 5. Oil cap gasket 6. Oil port

1. Put the blower down on a level surface.

2. Put a waste oil container under the drainage hole to catch the oil

as it drains out. The container should have a capacity of at least 220

ml to catch all of the oil.

12 ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita B7660WH Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info