Bedienungsanleitung Makita BFT121F (Seite 6 von 12) (Englisch, Holländisch)

598478

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Lighting up front lamp (Fig. 5)

For models BFT120F/BFT121F only

CAUTION:

Do not look in the light or see the source of light directly.

Pull the switch trigger to light up the front lamp. The lamp

keeps on lighting while the switch trigger is being pulled.

The light automatically goes out 10 seconds after the

switch trigger is released.

Reversing switch action (Fig. 6)

CAUTION:

• Always check the direction of rotation before operation.

• Use the reversing switch only after the tool comes to a

complete stop. Changing the direction of rotation

before the tool stops may damage the tool.

• When not operating the tool, always set the reversing

switch lever to the neutral position.

This tool has a reversing switch to change the direction of

rotation. Move the reversing switch lever to the

posi-

tion (A side) for clockwise rotation or the

E position

(B side) for counterclockwise rotation.

When the reversing switch lever is in the neutral position,

the switch trigger cannot be pulled.

LED indicator/Beeper (Fig. 7)

LED indicator/Beeper on the tool shows the following functions.

Function Status

Status of the LED indicator/beeper

Action to be taken

LED indicator Beeper

Auto-stop

fastening

This function works when the tool

has reached the preset fastening

torque and normal tightening has

been completed. This helps over-

tightening to be avoided.

Lights up in

green for

approximately

one second.

——

Delayed re-start For approximately one second

after auto-stop fastening, the tool

does not start even if the switch

trigger is pulled.

Warning against

insufficient

fastening

Insufficient fastening has been

performed when the switch trig-

ger has released before reaching

the preset fastening torque.

Lights up in red. A long beep Retighten the screw

Warning for

battery cartridge

capacity

This indicates the appropriate

time to replace the battery car-

tridge when the battery power

becomes low.

Flickers in red

slowly.

A series of long

beeps

Replace the battery

with fully charged one

Checking the

remaining battery

capacity, Autostop

This function works when the

battery power is almost used up.

At this time, tool stops immedi-

ately.

Lights up in red. A long beep Replace the battery

with fully charged one

Check the LED

indicator, light and

beeper operation

This function works to check the

proper operation of the LED indi-

cator, light and beeper when a

battery cartridge has been

inserted into the tool.

Lights up first in

green, next red.

(And then the

light comes on.)

A series of very

short beeps

—

Anti-reset of

controller

This function works when an

abnormal drop of the battery volt-

age occurs for some reason, and

the tool stops.

Flickers in red

and green

alternatively.

A series of short

beeps

Replace the battery

with fully charged one

Overheat This function works when the

temperature of the controller goes

up very highly, and the tool stops.

Flickers in red

quickly. A series of short

beeps

Remove the battery

cartridge

immediately and cool

the tool down.

Operation error of

the switch trigger

This function works to avoid the

tool’s immediate start upon inser-

tion of battery cartridge into the

tool with the switch trigger being

pulled.

Flickers in red

and green

alternatively.

A series of short

beeps

Release the switch

trigger.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BFT121F Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita BFT121F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info