Bedienungsanleitung Makita BFT121F (Seite 5 von 60) (Deutsch, Englisch, Polnisch)

598478

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

part cannot be seen. If not, it may accidentally fall

out of the tool, causing injury to you or someone

around you.

Charging

Before using battery charger, read all instructions and

cautionary markings on the battery charger.

Tips for maintaining maximum battery life

1. Always stop tool operation and charge the battery

cartridge when you notice that the LED indicator

lightened up.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room

temperature at 10°C - 40°C (50°F - 104°F).

Let a hot battery cartridge cool down before

charging it.

4. Charge the Nickel Metal Hydride battery cartridge

when you do not use it for more than six months.

Refresh charging

• Refreshing adapter (optional accessory) can

refresh an inactive battery cartridge.

• Refresh charging should be done once a week.

• When you charge a new battery cartridge or a

battery cartridge that has not been used for a long

time, it may not accept a full charge. In this case,

refresh charging must be done. The battery

cartridge may decrease the tool perfor-mance,

because the chemical substance of the battery

cartridge is inactive.

Checking the remaining battery capacity

For Battery 9020A/9033A

Indicating lamp

Capacity

80% - 100%

60% - 80%

40% - 60%

10% - 40%

0% - 10%

Indicating lamp

Capacity

80% - 100%

60% - 80%

40% - 60%

10% - 40%

0% - 10%

orange

001254

When charging

When the charging begins, the first (far left) indicating

lamp begins to flicker. Then, as charging proceeds, the

other lamps light, one after the other, to indicate the

battery capacity.

When using

When the tool is switched on, the lamps will light to

indicate the remaining battery capacity. When the tool is

switched off, the light goes out. If the battery has not

been used for a long time, or is needed refresh charging,

the orange lamp begins to flicker. Use Makita refreshing

adapter to refresh the battery.

CAUTION:

• A battery cartridge extracted from the charger that

has been unplugged with the battery cartridge

inserted does not indicate the battery capacity due

to its protective function even if the tool is switched

on after the battery insertion into the tool. At this

time, recharge it for about five seconds before use.

NOTE:

• Please contact Makita Authorized or Factory

Service Center if the warning lamp of the battery

cartridge does not light up when using or charging.

Switch action

Fig.3

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the switch trigger

actuates properly and returns to the "OFF" position

when released.

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

Lighting up front lamp

For models BFT120F/BFT121F only

Fig.4

CAUTION:

• Do not look in the light or see the source of light

directly.

Pull the switch trigger to light up the front lamp. The

lamp keeps on lighting while the switch trigger is being

pulled. The light automatically goes out 10 seconds after

the switch trigger is released.

Reversing switch action

Fig.5

CAUTION:

• Always check the direction of rotation before

operation.

• Use the reversing switch only after the tool comes

to a complete stop. Changing the direction of

rotation before the tool stops may damage the tool.

• When not operating the tool, always set the

reversing switch lever to the neutral position.

This tool has a reversing switch to change the direction

of rotation. Move the reversing switch lever to

the

position (A side) for clockwise rotation or

the

position (B side) for counterclockwise rotation.

When the reversing switch lever is in the neutral position,

the switch trigger cannot be pulled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BFT121F Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita BFT121F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info