Bedienungsanleitung Makita bhp 460 sh (Seite 4 von 23) (Englisch, Holländisch)

387500

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

ENGLISH

Explanation of general view

1Button

2 Battery cartridge

3Terminal cover

4 Charging light

5 Grip base

6Teeth

7 Side grip

8 Loosen

9 Tighten

10 Depth rod

11 Thumb screw

12 Sleeve

13 Bit

14 Bit holder

15 Switch trigger

16 Reversing switch lever

17 A side

18 B side

19 Clockwise

20 Counterclockwise

21 Low speed

22 High speed

23 Speed change lever

24 Action mode changing ring

25 Arrow

26 Adjusting ring

27 Graduations

28 Limit mark

29 Brush holder cap

30 Screwdriver

SPECIFICATIONS

Model BHP460

Capacities

Concrete ............................................................ 16 mm

Steel ..................................................................13 mm

Wood ................................................................. 38 mm

Wood screw ........................................ 10 mm x 90 mm

Machine screw .....................................................6 mm

No load speed (min

-1

)

High ............................................................... 0 – 1,500

Low ...................................................................0 – 460

Blows per minute

High .............................................................0 – 22,500

Low ................................................................0 – 6,900

Overall length .....................................................267 mm

Net weight (with battery cartridge) ......................... 2.7 kg

Rated voltage ...................................................D.C. 24 V

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

IMPORTANT SAFETY INSTRUCTIONS

FOR CHARGER & BATTERY CARTRIDGE

ENC002-2

1. SAVE THESE INSTRUCTIONS — This manual

contains important safety and operating instruc-

tions for battery charger.

2. Before using battery charger, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using bat-

tery.

3. CAUTION — To reduce risk of injury, charge only

MAKITA type rechargeable batteries. Other types

of batteries may burst causing personal injury

and damage.

4. Do not expose charger to rain or snow.

5. Use of an attachment not recommended or sold

by the battery charger manufacturer may result

in a risk of fire, electric shock, or injury to per-

sons.

6. To reduce risk of damage to electric plug and

cord, pull by plug rather than cord when discon-

necting charger.

7. Make sure cord is located so that it will not be

stepped on, tripped over, or otherwise subjected

to damage or stress.

8. Do not operate charger with damaged cord or

plug — replace them immediately.

9. Do not operate charger if it has received a sharp

blow, been dropped, or otherwise damaged in

any way; take it to a qualified serviceman.

10. Do not disassemble charger or battery cartridge;

take it to a qualified serviceman when service or

repair is required. Incorrect reassembly may

result in a risk of electric shock or fire.

11. To reduce risk of electric shock, unplug charger

from outlet before attempting any maintenance

or cleaning. Turning off controls will not reduce

this risk.

12. The battery charger is not intended for use by

young children or infirm persons without super-

vision.

13. Young children should be supervised to ensure

that they do not play with the battery charger.

ADDITIONAL SAFETY RULES

FOR CHARGER & BATTERY CARTRIDGE

1. Do not charge battery cartridge when tempera-

ture is BELOW 10°C (50°F) or ABOVE 40°C

(104°F).

2. Do not attempt to use a step-up transformer, an

engine generator or DC power receptacle.

3. Do not allow anything to cover or clog the

charger vents.

4. Do not short the battery cartridge:

(1) Do not touch the terminals with any conduc-

tive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a break-

down.

5. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

6. Do not incinerate the battery cartridge even if it

is severely damaged or is completely worn out.

The battery cartridge can explode in a fire.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita bhp 460 sh Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita bhp 460 sh

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info