388814
4
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
ENGLISH
Explanation of general view
1 Button
2 Battery cartridge
3 Terminal cover
4 Battery charger
5 Charging lights
6 Switch trigger
7 Reversing switch lever
8 A side
9 B side
10 Clockwise
11 Counterclockwise
12 Rotation with hammering
13 Lock button
14 Pointer
15 Change lever
16 Rotation only
17 Hammering only
18 Bit shank
19 Bit grease
20 Bit
21 Chuck cover
22 Depth gauge
23 Clamp screw
24 Tighten
25 Loosen
26 Side grip
27 Drill chuck
28 Dust cup
29 Foot
30 Battery cartridge B2417
31 Screw
32 Battery cartridge B2430
33 Limit mark
34 Brush holder cap
35 Screwdriver
SPECIFICATIONS
Model BHR200
Capacities
Concrete .................................................................. 20 mm
Wood ....................................................................... 27 mm
Steel ........................................................................ 13 mm
No load speed (min
-1
) ........................................... 0 1,100
Blows per minute .................................................... 0 4,700
Overall length ............................................................ 316 mm
Net weight ....................................................................... 4 kg
Rated voltage ......................................................... D.C. 24 V
Due to our continuing program of research and develop-
ment, the specifications herein are subject to change with-
out notice.
Note: Specifications may differ from country to country.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.
IMPORTANT SAFETY INSTRUCTIONS
FOR CHARGER & BATTERY
CARTRIDGE
ENC002-2
1. SAVE THESE INSTRUCTIONS This manual con-
tains important safety and operating instructions for
battery charger.
2. Before using battery charger, read all instructions
and cautionary markings on (1) battery charger, (2)
battery, and (3) product using battery.
3. CAUTION To reduce risk of injury, charge only
MAKITA type rechargeable batteries. Other types of
batteries may burst causing personal injury and dam-
age.
4. Do not expose charger to rain or snow.
5. Use of an attachment not recommended or sold by
the battery charger manufacturer may result in a risk
of fire, electric shock, or injury to persons.
6. To reduce risk of damage to electric plug and cord,
pull by plug rather than cord when disconnecting
charger.
7. Make sure cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage or stress.
8. Do not operate charger with damaged cord or plug
replace them immediately.
9. Do not operate charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way; take
it to a qualified serviceman.
10. Do not disassemble charger or battery cartridge; take
it to a qualified serviceman when service or repair is
required. Incorrect reassembly may result in a risk of
electric shock or fire.
11. To reduce risk of electric shock, unplug charger from
outlet before attempting any maintenance or clean-
ing. Turning off controls will not reduce this risk.
12. The battery charger is not intended for use by young
children or infirm persons without supervision.
13. Young children should be supervised to ensure that
they do not play with the battery charger.
ADDITIONAL SAFETY RULES FOR
CHARGER & BATTERY CARTRIDGE
1. Do not charge battery cartridge when temperature is
BELOW 10°C (50°F) or ABOVE 40°C (104°F).
2. Do not attempt to use a step-up transformer, an
engine generator or DC power receptacle.
3. Do not allow anything to cover or clog the charger
vents.
4. Do not short the battery cartridge:
(1) Do not touch the terminals with any conductive
material.
(2) Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
(3) Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow, over-
heating, possible burns and even a breakdown.
5. Do not store the tool and battery cartridge in loca-
tions where the temperature may reach or exceed
50°C (122°F).
6. Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
7. Be careful not to drop, shake or strike battery.
8. Do not charge inside a box or container of any kind.
The battery must be placed in a well ventilated area
during charging.
ADDITIONAL SAFETY RULES
FOR TOOL
ENB028-1
1. Be aware that this tool is always in an operating
condition, because it does not have to be plugged
into an electrical outlet.
2. Hold tool by insulated gripping surfaces when per-
forming an operation where the cutting tool may
contact hidden wiring. Contact with a ‘live’ wire will
make exposed metal parts of the tool ‘‘live’ and shock
the operator.
3. Wear ear protectors when using the tool for extended
periods. Prolonged exposure to high intensity noise
can cause hearing loss.
4. Wear a hard hat (safety helmet), safety glasses and/or
face shield. It is also highly recommended that you
wear a dust mask and thickly padded gloves.
5. Be sure the bit is secured in place before operation.
4
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Makita bhr 200 sfe wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Makita bhr 200 sfe

Makita bhr 200 sfe Bedienungsanleitung - Englisch, Holländisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info